Sheet 1
OrthographicThis sheet includes 95 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 95 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 91 geometry edges from the CAD projection pipeline.
This sheet includes 94 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Sheet 6. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the small IC with pins, allowing clear depiction of the pin count and spacing for accurate soldering.
Highlights the internal bore pattern and PCB traces beneath the connector assembly, ensuring correct alignment during manufacturing.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
MJBots Moteus BLDC Controller
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 10.0 | standard_view |
| 2 | Assembly - Top View | 10.0 | standard_view |
| 3 | Assembly - Left View | 10.0 | standard_view |
| 4 | Assembly - Isometric View | 10.0 | standard_view |
| 5 | Section A-A | 10.0 | section_view |
| 6 | Section B-B | 10.0 | section_view |
| 7 | Detail C | 2.0 | detail_view |
| 8 | Detail D | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.1 | A | B | low | bolt/hole pattern × 10 (position) |
| profile_of_a_surface | 0.2 | A | B | medium | 1921 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| position | 0.1 | diameter | A | B | low |
| profile_of_a_surface | 0.2 | A | B | medium |
All 33 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 46.0 | overall width 46.0mm |
| 2 | 1 | DistanceY | 53.0 | overall height 53.0mm |
| 3 | 1 | Diameter | 1.2 | 3x Ø1.2mm |
| 4 | 1 | Diameter | 1.5 | 3x Ø1.5mm |
| 5 | 1 | Distance | 55.2 | bolt circle Ø55.2mm (4 x Ø2.6 holes) |
| 6 | 1 | Distance | 17.7 | hole pitch 17.7mm (2 x Ø0.5, from model) |
| 7 | 1 | DistanceX | 40.0 | hole pattern width 40.0mm (4 x Ø5, from model) |
| 8 | 1 | DistanceY | 38.0 | hole pattern height 38.0mm (4 x Ø5, from model) |
| 9 | 2 | DistanceX | 46.0 | overall width 46.0mm |
| 10 | 2 | DistanceY | 12.2 | overall height 12.2mm |
| 11 | 2 | Radius | 0.5 | 4x R0.5mm |
| 12 | 2 | Radius | 0.9 | 4x R0.9mm |
| 13 | 2 | Radius | 1.2 | 8x R1.2mm |
| 14 | 2 | DistanceX | 37.7 | width 37.7mm at y≈-4.0mm [unverified span] |
| 15 | 2 | DistanceX | 25.9 | width 25.9mm at y≈-6.0mm [unverified span] |
| 16 | 3 | DistanceX | 12.2 | overall width 12.2mm |
| 17 | 3 | DistanceY | 53.0 | overall height 53.0mm |
| 18 | 3 | Radius | 1.1 | R1.1mm |
| 19 | 3 | Radius | 3.0 | R3.0mm |
| 20 | 3 | DistanceX | 9.3 | width 9.3mm at y≈24.0mm [unverified span] |
| 21 | 3 | DistanceY | 9.0 | height 9.0mm at x≈6.0mm [unverified span] |
| 22 | 5 | DistanceX | 12.2 | overall width 12.2mm |
| 23 | 5 | DistanceY | 53.0 | overall height 53.0mm |
| 24 | 5 | Radius | 1.1 | R1.1mm |
| 25 | 5 | Radius | 3.0 | R3.0mm |
| 26 | 5 | DistanceX | 9.3 | width 9.3mm at y≈-24.0mm [unverified span] |
| 27 | 5 | DistanceY | 9.0 | height 9.0mm at x≈-6.0mm [unverified span] |
| 28 | 6 | DistanceX | 12.2 | overall width 12.2mm |
| 29 | 6 | DistanceY | 46.0 | overall height 46.0mm |
| 30 | 6 | Diameter | 1.9 | 4x Ø1.9mm |
| 31 | 6 | DistanceY | 5.0 | hole pitch 5.0mm (vertical, Ø1.9) |
| 32 | 6 | Radius | 0.5 | 4x R0.5mm |
| 33 | 6 | DistanceY | 37.7 | height 37.7mm at x≈-4.0mm [unverified span] |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
