Sheet 1
OrthographicThis sheet includes 82 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 82 geometry edges from the CAD projection pipeline.
This sheet includes 114 geometry edges from the CAD projection pipeline.
This sheet includes 104 geometry edges from the CAD projection pipeline.
This sheet includes 81 geometry edges from the CAD projection pipeline.
This sheet includes 108 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the small hook and bore details to ensure accurate manufacturing.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Three Hook Fishing Lure
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.3 | A | B | C | medium | bolt/hole pattern × 4 (position) |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 3 | Radius | 0.6 | 5x R0.6mm | Radius ref Edge471 is BSplineCurve; no nearby Circle/Arc (a substitute further away is another hole) |
| 3 | Radius | 3.6 | 2x R3.6mm | Radius ref Edge397 is BSplineCurve; no nearby Circle/Arc (a substitute further away is another hole) |
| 6 | Radius | 0.7 | 2x R0.7mm | Radius ref Edge395 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 3 | — | value drifted: asked 1.5, measured 7.00137 | ||
| 3 | — | value drifted: asked 2.4, measured 178.376 | ||
| 3 | — | value drifted: asked 3.5, measured 85.0465 | ||
| 3 | — | value drifted: asked 4.1, measured 39.8364 | ||
| 5 | — | value drifted: asked 0.6, measured 1 | ||
| 5 | — | value drifted: asked 3.6, measured 6.00137 | ||
| 5 | — | value drifted: asked 10.8, measured 18.1731 | ||
| 5 | — | value drifted: asked 13.7, measured 23.059 | ||
| 5 | — | value drifted: asked 21.4, measured 36.0657 | ||
| 5 | — | value drifted: asked 21.8, measured 36.8485 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.3 | diameter | A | B | C | medium |
All 21 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 115.0 | overall width 115.0mm |
| 2 | 1 | DistanceY | 123.2 | overall height 123.2mm |
| 3 | 1 | Radius | 0.8 | 16x R0.8mm |
| 4 | 1 | Radius | 1.0 | 8x R1.0mm |
| 5 | 1 | Radius | 36.8 | 2x R36.8mm |
| 6 | 1 | Radius | 37.0 | 2x R37.0mm |
| 7 | 1 | Angle | 28.0 | 2x angle 28.0 deg |
| 8 | 1 | Angle | 20.0 | 2x angle 20.0 deg |
| 9 | 2 | DistanceX | 115.0 | overall width 115.0mm |
| 10 | 2 | DistanceY | 244.1 | overall height 244.1mm |
| 11 | 2 | DistanceY | 90.9 | hole pitch 90.9mm (2 x Ø6.8, from model) |
| 12 | 2 | DistanceX | 22.3 | hole pattern width 22.3mm (4 x Ø2.4, from model) |
| 13 | 2 | DistanceY | 5.0 | hole pattern height 5.0mm (4 x Ø2.4, from model) |
| 14 | 2 | DistanceX | 22.0 | hole pattern width 22.0mm (4 x Ø1.5, from model) |
| 15 | 6 | Radius | 0.5 | 8x R0.5mm |
| 16 | 6 | Radius | 0.8 | 20x R0.8mm |
| 17 | 6 | Angle | 29.69999999999999 | 2x angle 29.7 deg |
| 18 | 7 | Diameter | 1.0 | Ø1.0mm |
| 19 | 7 | Diameter | 16.7 | Ø16.7mm |
| 20 | 7 | Radius | 0.5 | 5x R0.5mm |
| 21 | 7 | Radius | 0.7 | 9x R0.7mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
