Sheet 1
OrthographicThis sheet includes 47 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 47 geometry edges from the CAD projection pipeline.
This sheet includes 38 geometry edges from the CAD projection pipeline.
This sheet includes 26 geometry edges from the CAD projection pipeline.
This sheet includes 52 geometry edges from the CAD projection pipeline.
This sheet includes 43 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the joint where struts connect to the top ring, highlighting fillet radii and bolt hole alignment.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
3D Printed Plant Stand
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 0.5 | standard_view |
| 3 | Assembly - Left View | 1.0 | standard_view |
| 4 | Assembly - Isometric View | 0.5 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.5 | A | B | medium | bolt/hole pattern × 7 (position) |
| position | 0.15 | A | B | low | bolt/hole pattern × 3 (position) |
| position | 0.15 | A | B | low | 9× Ø7.1 hole location (position) |
| profile_of_a_surface | 0.2 | A | B | medium | 258 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 1 | Radius | 99.9 | 20x R99.9mm | overlaps prior label (tried 10 position(s)) |
| 1 | Diameter | 164.5 | Ø164.5mm | overlaps prior label (tried 10 position(s)) |
| 1 | Diameter | 167.3 | Ø167.3mm | overlaps prior label (tried 10 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| position | 0.5 | diameter | A | B | medium |
| position | 0.15 | diameter | A | B | low |
| position | 0.15 | diameter | A | B | low |
| profile_of_a_surface | 0.2 | A | B | medium |
All 21 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 276.0 | overall width 276.0mm |
| 2 | 1 | DistanceY | 257.2 | overall height 257.2mm |
| 3 | 1 | Radius | 4.4 | 18x R4.4mm |
| 4 | 1 | Radius | 86.1 | 8x R86.1mm |
| 5 | 1 | Radius | 97.4 | 10x R97.4mm |
| 6 | 2 | DistanceY | 873.4 | overall height 873.4mm |
| 7 | 2 | Radius | 0.5 | 12x R0.5mm |
| 8 | 3 | DistanceX | 873.4 | overall width 873.4mm |
| 9 | 3 | DistanceY | 258.4 | overall height 258.4mm |
| 10 | 3 | Diameter | 1.0 | 2x Ø1.0mm |
| 11 | 3 | DistanceY | 27.0 | hole pitch 27.0mm (vertical, Ø1) |
| 12 | 3 | Radius | 0.5 | 8x R0.5mm |
| 13 | 3 | Radius | 2.5 | 4x R2.5mm |
| 14 | 3 | Angle | 3.4 | 2x angle 3.4 deg |
| 15 | 5 | DistanceX | 873.4 | overall width 873.4mm |
| 16 | 5 | DistanceY | 258.4 | overall height 258.4mm |
| 17 | 5 | Radius | 0.5 | 11x R0.5mm |
| 18 | 5 | Radius | 0.8 | 14x R0.8mm |
| 19 | 5 | Radius | 2.5 | 10x R2.5mm |
| 20 | 5 | Angle | 5.599999999999994 | angle 5.6 deg |
| 21 | 6 | Radius | 4.3 | 12x R4.3mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
