Sheet 1
OrthographicThis sheet includes 85 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 85 geometry edges from the CAD projection pipeline.
This sheet includes 116 geometry edges from the CAD projection pipeline.
This sheet includes 84 geometry edges from the CAD projection pipeline.
This sheet includes 85 geometry edges from the CAD projection pipeline.
This sheet includes 85 geometry edges from the CAD projection pipeline.
This sheet includes 114 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the central hub and radial strut connections to show small hole patterns and precise alignment details.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Motorized Tricycle Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.1 | A | B | C | low | bolt/hole pattern × 40 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 3 (position) |
| position | 0.3 | A | B | C | low | bolt/hole pattern × 3 (position) |
| position | 0.1 | A | B | C | medium | bolt/hole pattern × 6 (position) |
| position | 0.1 | A | B | C | low | bolt/hole pattern × 18 (position) |
| position | 0.1 | A | B | C | low | 18× Ø1 hole location (position) |
| position | 0.1 | A | B | C | medium | 5× Ø2 hole location (position) |
| position | 1.0 | A | B | C | medium | 2× Ø20 hole location (position) |
| position | 0.3 | A | B | C | low | 2× Ø40 hole location (position) |
| position | 0.15 | A | B | C | low | 2× Ø10 hole location (position) |
| position | 0.2 | A | B | C | low | hole Ø18 location (position) |
| profile_of_a_surface | 0.2 | A | B | C | low | 777 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.1 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | low |
| position | 0.1 | diameter | A | B | C | medium |
| position | 0.1 | diameter | A | B | C | low |
| position | 0.1 | diameter | A | B | C | low |
| position | 0.1 | diameter | A | B | C | medium |
| position | 1.0 | diameter | A | B | C | medium |
| position | 0.3 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| cylindricity | 0.2 | high | ||
| circularity | 0.2 | high | ||
| straightness | 0.1 | diameter | high | |
| circular_runout | 0.2 | C | high | |
| circular_runout | 0.2 | C | high | |
| total_runout | 0.2 | C | high | |
| total_runout | 0.2 | C | high | |
| profile_of_a_surface | 0.2 | A | B | C | low |
All 24 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 241.5 | overall width 241.5mm |
| 2 | 1 | DistanceY | 241.5 | overall height 241.5mm |
| 3 | 2 | DistanceX | 242.2 | overall width 242.2mm |
| 4 | 2 | DistanceY | 145.5 | overall height 145.5mm |
| 5 | 2 | Radius | 7.0 | 2x R7.0mm |
| 6 | 2 | Angle | 82.2 | 4x angle 82.2 deg |
| 7 | 2 | DistanceX | 146.4 | hole pitch 146.4mm (2 x Ø0.5, from model) |
| 8 | 2 | DistanceX | 86.4 | hole pitch 86.4mm (2 x Ø0.2, from model) |
| 9 | 3 | DistanceX | 145.5 | overall width 145.5mm |
| 10 | 3 | DistanceY | 242.2 | overall height 242.2mm |
| 11 | 3 | Angle | 47.5 | 4x angle 47.5 deg |
| 12 | 3 | Angle | 83.2 | 2x angle 83.2 deg |
| 13 | 5 | DistanceX | 145.5 | overall width 145.5mm |
| 14 | 5 | DistanceY | 242.2 | overall height 242.2mm |
| 15 | 5 | Radius | 10.0 | 2x R10.0mm |
| 16 | 5 | Angle | 86.4 | angle 86.4 deg |
| 17 | 5 | Angle | 47.5 | 4x angle 47.5 deg |
| 18 | 6 | Radius | 20.0 | R20.0mm |
| 19 | 7 | Diameter | 1.0 | 14x Ø1.0mm |
| 20 | 7 | DistanceX | 27.3 | hole pitch 27.3mm (horizontal, Ø1) |
| 21 | 7 | DistanceY | 40.0 | hole pitch 40.0mm (vertical, Ø1) |
| 22 | 7 | Radius | 1.0 | 24x R1.0mm |
| 23 | 7 | Angle | 63.7 | 8x angle 63.7 deg |
| 24 | 7 | Angle | 53.6 | 2x angle 53.6 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
