Sheet 1
OrthographicThis sheet includes 88 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 88 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 87 geometry edges from the CAD projection pipeline.
This sheet includes 83 geometry edges from the CAD projection pipeline.
This sheet includes 86 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the threaded connection and black seal band to clarify the sealing interface.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Nitrogen Pressure Regulator
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.3 | A | B | C | low | bolt/hole pattern × 6 (position) |
| position | 0.3 | A | B | C | low | bolt/hole pattern × 4 (position) |
| profile_of_a_surface | 0.2 | A | B | C | low | 117 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 2 | DistanceX | 117.8 | hole pitch 117.8mm (2 x Ø52, from model) | outside page band (tried 16 position(s)) |
| 6 | DistanceX | 16.8 | width 16.8mm at y≈0.0mm [unverified span] | refs off printable area |
| 6 | DistanceY | 18.4 | height 18.4mm at x≈0.0mm [unverified span] | refs off printable area |
| 2 | — | value drifted: asked 6.3, measured 12.6658 | ||
| 2 | — | value drifted: asked 29.5, measured 59 | ||
| 3 | — | value drifted: asked 83.8, measured 126.155 | ||
| 5 | — | value drifted: asked 83.8, measured 125.155 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| position | 0.3 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | low |
| profile_of_a_surface | 0.2 | A | B | C | low |
All 7 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 176.8 | overall width 176.8mm |
| 2 | 1 | DistanceY | 190.1 | overall height 190.1mm |
| 3 | 1 | Diameter | 19.0 | Ø19.0mm |
| 4 | 1 | Diameter | 22.0 | Ø22.0mm |
| 5 | 1 | Diameter | 28.0 | Ø28.0mm |
| 6 | 1 | Radius | 6.4 | 2x R6.4mm |
| 7 | 1 | Radius | 15.0 | 2x R15.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
