Sheet 1
OrthographicThis sheet includes 86 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 86 geometry edges from the CAD projection pipeline.
This sheet includes 16 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
Sheet 4. Geometry is derived from the 3D model projection for this drawing set.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies a small bore or fillet detail that is critical for mating with T-slot hardware.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Nuts DIN 508 for T-slots
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Isometric View | 2.0 | standard_view |
| 4 | Section A-A | 2.0 | section_view |
| 5 | Section B-B | 2.0 | section_view |
| 6 | Detail C | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.15 | A | B | C | low | bolt/hole pattern × 16 (position) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| parallelism | 0.2 | A | high | |
| position | 0.15 | diameter | A | B | C | low |
All 24 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 199.6 | overall width 199.6mm |
| 2 | 1 | DistanceY | 199.6 | overall height 199.6mm |
| 3 | 1 | Angle | 63.400000000000006 | 32x angle 63.4 deg |
| 4 | 1 | DistanceX | 174.9 | width 174.9mm at y≈-74.86124999999998mm [unverified span] |
| 5 | 1 | DistanceX | 150.2 | width 150.2mm at y≈-50.905649999999994mm [unverified span] |
| 6 | 1 | DistanceY | 174.6 | height 174.6mm at x≈0.0mm [unverified span] |
| 7 | 2 | DistanceX | 199.6 | overall width 199.6mm |
| 8 | 2 | DistanceY | 199.6 | overall height 199.6mm |
| 9 | 2 | DistanceX | 160.0 | hole pattern width 160.0mm (4 x Ø8, from model) |
| 10 | 2 | DistanceY | 160.0 | hole pattern height 160.0mm (4 x Ø8, from model) |
| 11 | 2 | DistanceX | 136.0 | hole pattern width 136.0mm (8 x Ø8, from model) |
| 12 | 2 | DistanceY | 136.0 | hole pattern height 136.0mm (8 x Ø8, from model) |
| 13 | 2 | DistanceX | 110.0 | hole pattern width 110.0mm (4 x Ø5, from model) |
| 14 | 2 | DistanceY | 110.0 | hole pattern height 110.0mm (4 x Ø5, from model) |
| 15 | 4 | DistanceX | 199.6 | overall width 199.6mm |
| 16 | 4 | DistanceY | 199.6 | overall height 199.6mm |
| 17 | 4 | Angle | 63.400000000000006 | 20x angle 63.4 deg |
| 18 | 4 | DistanceX | 175.2 | width 175.2mm at y≈74.86124999999998mm [unverified span] |
| 19 | 4 | DistanceX | 150.2 | width 150.2mm at y≈50.905649999999994mm [unverified span] |
| 20 | 5 | DistanceX | 199.6 | overall width 199.6mm |
| 21 | 5 | DistanceY | 199.6 | overall height 199.6mm |
| 22 | 5 | Angle | 63.400000000000006 | 20x angle 63.4 deg |
| 23 | 5 | DistanceX | 175.2 | width 175.2mm at y≈74.86124999999998mm [unverified span] |
| 24 | 5 | DistanceX | 150.2 | width 150.2mm at y≈50.905649999999994mm [unverified span] |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
