Sheet 1
OrthographicThis sheet includes 24 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 24 geometry edges from the CAD projection pipeline.
This sheet includes 108 geometry edges from the CAD projection pipeline.
This sheet includes 109 geometry edges from the CAD projection pipeline.
This sheet includes 77 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the details of the handwheel connection and the threaded stem, highlighting the thread pitch and fit.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Paddle Shifter with Tension Spring
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 1.0 | standard_view |
| 2 | Assembly - Top View | 0.99 | standard_view |
| 3 | Assembly - Left View | 1.0 | standard_view |
| 4 | Assembly - Isometric View | 0.99 | standard_view |
| 5 | Section A-A | 1.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.4 | A | B | C | medium | 874 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 1 | Diameter | 202.9 | Ø202.9mm | refs off printable area |
| 1 | Radius | 251.0 | 2x R251.0mm | overlaps prior label (tried 10 position(s)) |
| 3 | Radius | 20.0 | 2x R20.0mm | Radius ref Edge771 is BSplineCurve; no nearby Circle/Arc (a substitute further away is another hole) |
| 3 | DistanceY | 250.0 | hole pitch 250.0mm (vertical, Ø26) | outside page band (tried 16 position(s)) |
| 3 | DistanceY | 350.0 | overall height 350.0mm | outside page band (tried 16 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| cylindricity | 0.2 | high | ||
| circular_runout | 0.2 | B | high | |
| circular_runout | 0.2 | B | high | |
| total_runout | 0.2 | B | high | |
| profile_of_a_surface | 0.4 | A | B | C | medium |
All 25 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | Diameter | 208.4 | Ø208.4mm |
| 2 | 1 | Radius | 10.0 | 8x R10.0mm |
| 3 | 1 | Radius | 138.0 | 5x R138.0mm |
| 4 | 1 | DistanceY | 350.0 | height 350.0mm at x≈-125.68248mm [unverified span] |
| 5 | 1 | DistanceX | 194.9 | hole pattern width 194.9mm (6 x Ø17.5, from model) |
| 6 | 1 | DistanceY | 225.0 | hole pattern height 225.0mm (6 x Ø17.5, from model) |
| 7 | 1 | DistanceX | 88.0 | hole pitch 88.0mm (2 x Ø10.2, from model) |
| 8 | 1 | DistanceY | 120.0 | hole pitch 120.0mm (2 x Ø21, from model) |
| 9 | 2 | DistanceX | 276.5 | overall width 276.5mm |
| 10 | 2 | Diameter | 125.0 | Ø125.0mm |
| 11 | 2 | Distance | 200.0 | bolt circle Ø200.0mm (4 x Ø16 holes) |
| 12 | 2 | Radius | 20.0 | 2x R20.0mm |
| 13 | 2 | Radius | 92.3 | 6x R92.3mm |
| 14 | 2 | Radius | 98.1 | 4x R98.1mm |
| 15 | 3 | Diameter | 26.0 | 2x Ø26.0mm |
| 16 | 3 | Radius | 5.0 | 2x R5.0mm |
| 17 | 3 | Radius | 10.0 | 8x R10.0mm |
| 18 | 3 | Radius | 13.1 | 2x R13.1mm |
| 19 | 3 | Radius | 18.9 | 2x R18.9mm |
| 20 | 5 | DistanceY | 350.0 | overall height 350.0mm |
| 21 | 5 | Radius | 10.0 | 2x R10.0mm |
| 22 | 5 | Radius | 236.1 | R236.1mm |
| 23 | 5 | Angle | 30.3 | angle 30.3 deg |
| 24 | 5 | Angle | 62.9 | angle 62.9 deg |
| 25 | 6 | Radius | 13.0 | 4x R13.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
