Sheet 1
OrthographicThis sheet includes 108 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 108 geometry edges from the CAD projection pipeline.
This sheet includes 82 geometry edges from the CAD projection pipeline.
This sheet includes 69 geometry edges from the CAD projection pipeline.
This sheet includes 45 geometry edges from the CAD projection pipeline.
This sheet includes 107 geometry edges from the CAD projection pipeline.
This sheet includes 70 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the bolt pattern on the left flange, providing a clear view of the hole dimensions and spacing.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Worm Gear and Worm Wheel Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.4 | A | B | C | medium | 741 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 7 | Radius | 0.8 | 2x R0.8mm | outside page band (tried 20 position(s)) |
| 3 | — | value drifted: asked 12.5, measured 25 | ||
| 3 | — | value drifted: asked 13, measured 26 | ||
| 3 | — | value drifted: asked 14, measured 28 | ||
| 3 | — | value drifted: asked 15.2, measured 30.5 | ||
| 3 | — | value drifted: asked 18, measured 36 | ||
| 5 | — | value drifted: asked 2, measured 4 | ||
| 5 | — | value drifted: asked 2.5, measured 5 | ||
| 5 | — | value drifted: asked 10, measured 20 | ||
| 5 | — | value drifted: asked 12.5, measured 25 | ||
| 5 | — | value drifted: asked 13, measured 26 | ||
| 5 | — | value drifted: asked 14.5, measured 29 | ||
| 5 | — | value drifted: asked 15, measured 30 | ||
| 7 | — | value drifted: asked 3.4, measured 17 | ||
| 7 | — | value drifted: asked 6.6, measured 33 | ||
| 7 | — | value drifted: asked 7, measured 35 | ||
| 7 | — | value drifted: asked 7.6, measured 38 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| cylindricity | 0.2 | high | ||
| circular_runout | 0.2 | A | high | |
| circular_runout | 0.2 | A | high | |
| circular_runout | 0.2 | A | high | |
| total_runout | 0.2 | A | high | |
| total_runout | 0.2 | A | high | |
| total_runout | 0.2 | A | high | |
| profile_of_a_surface | 0.4 | A | B | C | medium |
All 21 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 283.0 | overall width 283.0mm |
| 2 | 1 | DistanceY | 277.0 | overall height 277.0mm |
| 3 | 1 | DistanceX | 18.0 | hole pitch 18.0mm (horizontal, Ø16.6) |
| 4 | 1 | DistanceY | 140.0 | hole pitch 140.0mm (vertical, Ø11.4) |
| 5 | 1 | Radius | 0.6 | 2x R0.6mm |
| 6 | 1 | Radius | 1.0 | 2x R1.0mm |
| 7 | 1 | Angle | 28.400000000000006 | 2x angle 28.4 deg |
| 8 | 1 | Angle | 14.099999999999994 | 2x angle 14.1 deg |
| 9 | 2 | DistanceX | 283.0 | overall width 283.0mm |
| 10 | 2 | DistanceY | 125.0 | overall height 125.0mm |
| 11 | 2 | Radius | 1.0 | 2x R1.0mm |
| 12 | 2 | Angle | 28.400000000000006 | angle 28.4 deg |
| 13 | 2 | Angle | 65.2 | 3x angle 65.2 deg |
| 14 | 2 | DistanceX | 266.1 | width 266.1mm at y≈50.94mm [unverified span] |
| 15 | 3 | DistanceY | 67.8 | hole pitch 67.8mm (2 x Ø5.9, from model) |
| 16 | 6 | Diameter | 11.4 | 4x Ø11.4mm |
| 17 | 6 | Diameter | 13.0 | 4x Ø13.0mm |
| 18 | 6 | DistanceX | 18.0 | hole pitch 18.0mm (horizontal, Ø11.4) |
| 19 | 6 | DistanceX | 18.0 | hole pitch 18.0mm (horizontal, Ø16.7) |
| 20 | 6 | Radius | 3.4 | 24x R3.4mm |
| 21 | 7 | DistanceY | 67.8 | hole pitch 67.8mm (2 x Ø5.9, from model) |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
