Sheet 1
OrthographicThis sheet includes 62 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 62 geometry edges from the CAD projection pipeline.
This sheet includes 49 geometry edges from the CAD projection pipeline.
This sheet includes 42 geometry edges from the CAD projection pipeline.
This sheet includes 19 geometry edges from the CAD projection pipeline.
This sheet includes 61 geometry edges from the CAD projection pipeline.
This sheet includes 42 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the small fillet and the connection point of the first chain link, highlighting critical joint details.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Pelican Hook
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 10.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.2 | A | B | C | medium | 53 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| cylindricity | 0.2 | high | ||
| profile_of_a_surface | 0.2 | A | B | C | medium |
All 35 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 211.1 | overall width 211.1mm |
| 2 | 1 | DistanceY | 32.0 | overall height 32.0mm |
| 3 | 1 | Radius | 2.0 | 3x R2.0mm |
| 4 | 1 | Radius | 5.5 | 8x R5.5mm |
| 5 | 1 | Radius | 7.9 | 4x R7.9mm |
| 6 | 1 | Radius | 13.5 | 8x R13.5mm |
| 7 | 1 | Radius | 15.9 | 4x R15.9mm |
| 8 | 1 | DistanceY | 19.2 | hole pitch 19.2mm (2 x Ø8, from model) |
| 9 | 2 | DistanceX | 211.0 | overall width 211.0mm |
| 10 | 2 | Diameter | 16.0 | Ø16.0mm |
| 11 | 2 | Diameter | 34.0 | Ø34.0mm |
| 12 | 2 | Radius | 10.0 | 2x R10.0mm |
| 13 | 2 | Radius | 13.6 | 4x R13.6mm |
| 14 | 2 | Radius | 15.0 | 3x R15.0mm |
| 15 | 2 | Radius | 16.0 | 4x R16.0mm |
| 16 | 2 | Radius | 32.5 | R32.5mm |
| 17 | 2 | Radius | 34.5 | 2x R34.5mm |
| 18 | 2 | DistanceX | 60.0 | hole pitch 60.0mm (2 x Ø8, from model) |
| 19 | 3 | DistanceY | 32.0 | overall height 32.0mm |
| 20 | 3 | Radius | 5.5 | 2x R5.5mm |
| 21 | 3 | DistanceX | 67.7 | width 67.7mm at y≈-4.0mm [unverified span] |
| 22 | 3 | DistanceY | 19.2 | hole pitch 19.2mm (2 x Ø8, from model) |
| 23 | 3 | DistanceX | 23.8 | hole pitch 23.8mm (2 x Ø8, from model) |
| 24 | 3 | DistanceY | 24.0 | hole pitch 24.0mm (2 x Ø8, from model) |
| 25 | 5 | Radius | 2.0 | 6x R2.0mm |
| 26 | 5 | DistanceX | 61.4 | width 61.4mm at y≈-4.0mm [unverified span] |
| 27 | 5 | DistanceX | 26.8 | width 26.8mm at y≈0.0mm [unverified span] |
| 28 | 6 | Radius | 4.0 | 10x R4.0mm |
| 29 | 6 | Radius | 5.6 | R5.6mm |
| 30 | 7 | DistanceY | 32.0 | overall height 32.0mm |
| 31 | 7 | Radius | 13.6 | R13.6mm |
| 32 | 7 | DistanceY | 19.2 | hole pitch 19.2mm (2 x Ø8, from model) |
| 33 | 7 | DistanceX | 19.0 | hole pitch 19.0mm (2 x Ø8, from model) |
| 34 | 7 | DistanceX | 23.8 | hole pitch 23.8mm (2 x Ø8, from model) |
| 35 | 7 | DistanceY | 24.0 | hole pitch 24.0mm (2 x Ø8, from model) |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
