Sheet 1
OrthographicThis sheet includes 91 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 91 geometry edges from the CAD projection pipeline.
This sheet includes 122 geometry edges from the CAD projection pipeline.
This sheet includes 91 geometry edges from the CAD projection pipeline.
This sheet includes 81 geometry edges from the CAD projection pipeline.
This sheet includes 108 geometry edges from the CAD projection pipeline.
This sheet includes 111 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the detailed arrangement of the propeller bores and their connection to the central shaft, highlighting critical alignment features.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Personal Urban Air Mobility Vehicle
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 5.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 5.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 5.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.2 | A | B | C | medium | 673 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 2 | — | value drifted: asked 35.9, measured 34.342 | ||
| 2 | — | value drifted: asked 35.9, measured 70.2734 | ||
| 2 | — | value drifted: asked 45.4, measured 12.142 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| perpendicularity | 0.2 | A | high | |
| profile_of_a_surface | 0.2 | A | B | C | medium |
All 33 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 111.9 | overall width 111.9mm |
| 2 | 1 | Radius | 1.5 | 3x R1.5mm |
| 3 | 1 | Radius | 3.1 | R3.1mm |
| 4 | 1 | Radius | 12.5 | R12.5mm |
| 5 | 1 | Angle | 23.2 | 2x angle 23.2 deg |
| 6 | 2 | DistanceY | 150.4 | overall height 150.4mm |
| 7 | 2 | Diameter | 4.0 | 8x Ø4.0mm |
| 8 | 2 | Diameter | 5.0 | 2x Ø5.0mm |
| 9 | 2 | DistanceY | 104.6 | hole pitch 104.6mm (vertical, Ø5) |
| 10 | 2 | Angle | 85.7 | 2x angle 85.7 deg |
| 11 | 2 | Angle | 56.5 | 10x angle 56.5 deg |
| 12 | 3 | DistanceX | 150.4 | overall width 150.4mm |
| 13 | 3 | DistanceY | 45.4 | overall height 45.4mm |
| 14 | 3 | Angle | 84.7 | angle 84.7 deg |
| 15 | 3 | Angle | 74.4 | angle 74.4 deg |
| 16 | 5 | DistanceX | 150.4 | overall width 150.4mm |
| 17 | 5 | DistanceY | 45.4 | overall height 45.4mm |
| 18 | 5 | Radius | 1.5 | R1.5mm |
| 19 | 5 | Radius | 2.7 | R2.7mm |
| 20 | 5 | Radius | 3.1 | R3.1mm |
| 21 | 5 | Angle | 7.099999999999994 | 2x angle 7.1 deg |
| 22 | 5 | Angle | 87.5 | angle 87.5 deg |
| 23 | 6 | Radius | 16.4 | 33x R16.4mm |
| 24 | 6 | Radius | 21.4 | 4x R21.4mm |
| 25 | 6 | Radius | 21.9 | 38x R21.9mm |
| 26 | 6 | Angle | 67.0 | 5x angle 67.0 deg |
| 27 | 6 | Angle | 33.5 | 2x angle 33.5 deg |
| 28 | 7 | Diameter | 5.0 | Ø5.0mm |
| 29 | 7 | DistanceX | 45.5 | hole pitch 45.5mm (horizontal, Ø1.6) |
| 30 | 7 | Radius | 17.2 | 2x R17.2mm |
| 31 | 7 | Radius | 21.4 | 4x R21.4mm |
| 32 | 7 | Angle | 67.0 | 5x angle 67.0 deg |
| 33 | 7 | DistanceX | 44.8 | hole pitch 44.8mm (2 x Ø42.8, from model) |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
