Sheet 1
OrthographicThis sheet includes 113 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 113 geometry edges from the CAD projection pipeline.
This sheet includes 118 geometry edges from the CAD projection pipeline.
This sheet includes 118 geometry edges from the CAD projection pipeline.
This sheet includes 98 geometry edges from the CAD projection pipeline.
This sheet includes 110 geometry edges from the CAD projection pipeline.
This sheet includes 111 geometry edges from the CAD projection pipeline.
This sheet includes 109 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the internal gear train and shafts, providing a clear view of the gear meshing and bearing locations.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Planetary Gear AC Servo Motor HK-KR053G1_5
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 5.0 | standard_view |
| 3 | Assembly - Front Hidden View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.1 | C | B | medium | 348 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 1 | Radius | 14.4 | R14.4mm | Radius ref Edge411 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 6 | Diameter | 4.8 | 4x Ø4.8mm | Diameter ref Edge503 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| cylindricity | 0.2 | high | ||
| circularity | 0.2 | high | ||
| circular_runout | 0.2 | B | high | |
| circular_runout | 0.2 | B | high | |
| total_runout | 0.2 | B | high | |
| total_runout | 0.2 | B | high | |
| profile_of_a_surface | 0.1 | C | B | medium |
All 51 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 74.8 | overall width 74.8mm |
| 2 | 1 | DistanceY | 171.6 | overall height 171.6mm |
| 3 | 1 | Diameter | 7.0 | 2x Ø7.0mm |
| 4 | 1 | DistanceX | 15.0 | hole pitch 15.0mm (horizontal, Ø1.8) |
| 5 | 1 | Radius | 4.0 | 2x R4.0mm |
| 6 | 1 | Angle | 83.6 | 4x angle 83.6 deg |
| 7 | 1 | DistanceX | 21.0 | hole pitch 21.0mm (2 x Ø2.5, from model) |
| 8 | 2 | DistanceX | 74.8 | overall width 74.8mm |
| 9 | 2 | DistanceY | 65.0 | overall height 65.0mm |
| 10 | 2 | Diameter | 5.5 | 6x Ø5.5mm |
| 11 | 2 | Diameter | 7.0 | 3x Ø7.0mm |
| 12 | 2 | DistanceY | 53.0 | hole pitch 53.0mm (vertical, Ø7) |
| 13 | 2 | DistanceX | 55.0 | hole pitch 55.0mm (horizontal, Ø5) |
| 14 | 2 | DistanceX | 55.0 | hole pitch 55.0mm (horizontal, Ø5.5) |
| 15 | 2 | DistanceY | 55.0 | hole pattern height 55.0mm (4 x Ø5.5, from model) |
| 16 | 2 | Distance | 47.8 | hole pitch 47.8mm (2 x Ø3.6, from model) |
| 17 | 3 | DistanceY | 171.6 | overall height 171.6mm |
| 18 | 3 | Diameter | 7.0 | 2x Ø7.0mm |
| 19 | 3 | Diameter | 19.7 | Ø19.7mm |
| 20 | 3 | DistanceX | 15.0 | hole pitch 15.0mm (horizontal, Ø1.8) |
| 21 | 3 | Angle | 83.6 | 5x angle 83.6 deg |
| 22 | 3 | Angle | 71.0 | angle 71.0 deg |
| 23 | 5 | DistanceX | 65.0 | overall width 65.0mm |
| 24 | 5 | DistanceY | 171.6 | overall height 171.6mm |
| 25 | 5 | Radius | 0.7 | 2x R0.7mm |
| 26 | 5 | Radius | 1.0 | 5x R1.0mm |
| 27 | 5 | Radius | 1.9 | 2x R1.9mm |
| 28 | 5 | Radius | 2.0 | 2x R2.0mm |
| 29 | 5 | Radius | 3.0 | 6x R3.0mm |
| 30 | 5 | Radius | 4.0 | 2x R4.0mm |
| 31 | 6 | Diameter | 2.4 | 4x Ø2.4mm |
| 32 | 6 | Diameter | 5.0 | 4x Ø5.0mm |
| 33 | 6 | Radius | 3.0 | 10x R3.0mm |
| 34 | 6 | Radius | 3.5 | 2x R3.5mm |
| 35 | 6 | Angle | 26.6 | 4x angle 26.6 deg |
| 36 | 7 | Diameter | 1.8 | 4x Ø1.8mm |
| 37 | 7 | Diameter | 5.0 | 4x Ø5.0mm |
| 38 | 7 | Radius | 9.3 | 4x R9.3mm |
| 39 | 7 | Radius | 9.8 | 8x R9.8mm |
| 40 | 7 | Angle | 65.0 | 2x angle 65.0 deg |
| 41 | 7 | Angle | 26.6 | 4x angle 26.6 deg |
| 42 | 8 | Diameter | 4.5 | 8x Ø4.5mm |
| 43 | 8 | Diameter | 6.0 | 4x Ø6.0mm |
| 44 | 8 | DistanceX | 34.2 | hole pitch 34.2mm (horizontal, Ø4.5) |
| 45 | 8 | DistanceX | 34.2 | hole pitch 34.2mm (horizontal, Ø6) |
| 46 | 8 | Radius | 3.2 | 2x R3.2mm |
| 47 | 8 | Radius | 4.0 | 2x R4.0mm |
| 48 | 8 | Radius | 4.1 | 4x R4.1mm |
| 49 | 8 | Radius | 19.2 | 2x R19.2mm |
| 50 | 8 | Radius | 19.5 | 3x R19.5mm |
| 51 | 8 | Radius | 20.2 | 4x R20.2mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
