Sheet 1
OrthographicThis sheet includes 75 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 75 geometry edges from the CAD projection pipeline.
This sheet includes 62 geometry edges from the CAD projection pipeline.
This sheet includes 56 geometry edges from the CAD projection pipeline.
This sheet includes 75 geometry edges from the CAD projection pipeline.
This sheet includes 57 geometry edges from the CAD projection pipeline.
Sheet 4. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the hexagonal socket on the gearbox to show the drive feature clearly.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Planetary Gearbox Actuator Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Isometric View | 2.0 | standard_view |
| 4 | Section A-A | 2.0 | section_view |
| 5 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.3 | A | B | C | medium | bolt/hole pattern × 8 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 4 (position) |
| position | 0.3 | A | B | C | medium | bolt/hole pattern × 10 (position) |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 6 (position) |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 6 (position) |
| position | 0.1 | A | B | C | low | bolt/hole pattern × 5 (position) |
| position | 0.5 | A | B | C | medium | bolt/hole pattern × 4 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 4 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 5 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 3 (position) |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 3 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 6 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 10 (position) |
| position | 0.5 | A | B | C | medium | bolt/hole pattern × 3 (position) |
| position | 0.3 | A | B | C | medium | bolt/hole pattern × 3 (position) |
| position | 0.3 | A | B | C | medium | bolt/hole pattern × 5 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 8 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 8 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 8 (position) |
| position | 0.1 | A | B | C | low | 10× Ø1.11 hole location (position) |
| position | 0.1 | A | B | C | low | 10× Ø1.23 hole location (position) |
| position | 0.2 | A | B | C | low | 4× Ø12 hole location (position) |
| position | 0.15 | A | B | C | low | 4× Ø5 hole location (position) |
| position | 0.2 | A | B | C | low | 2× Ø12.7 hole location (position) |
| position | 0.3 | A | B | C | low | 2× Ø50 hole location (position) |
| profile_of_a_surface | 0.4 | A | B | C | medium | 152 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| profile_of_a_surface | 0.4 | A | B | C | medium | largest surface (110 mm) reached by no other frame — profile locates it to the datum frame instead of leaving it to the general tolerance note |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 2 | DistanceX | 30.0 | hole pitch 30.0mm (horizontal, Ø4) | outside page band (tried 16 position(s)) |
| 2 | DistanceX | 127.0 | hole pitch 127.0mm (horizontal, Ø6.3) | outside page band (tried 17 position(s)) |
| 2 | Radius | 173.1 | 6x R173.1mm | outside page band (tried 10 position(s)) |
| 2 | DistanceX | 235.0 | hole pitch 235.0mm (horizontal, Ø3.2) | outside page band (tried 16 position(s)) |
| 2 | DistanceX | 244.1 | hole pitch 244.1mm (horizontal, Ø2.4) | outside page band (tried 17 position(s)) |
| 4 | DistanceY | 93.8 | height 93.8mm at x≈10.21056mm [unverified span] | outside page band (tried 16 position(s)) |
| 4 | DistanceY | 94.1 | height 94.1mm at x≈-10.21056mm [unverified span] | outside page band (tried 16 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| parallelism | 0.2 | A | high | |
| position | 0.3 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.1 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | medium |
| position | 0.3 | diameter | A | B | C | medium |
| position | 0.3 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.1 | diameter | A | B | C | low |
| position | 0.1 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | low |
| cylindricity | 0.2 | high | ||
| circularity | 0.2 | high | ||
| straightness | 0.1 | diameter | high | |
| circular_runout | 0.2 | B | high | |
| circular_runout | 0.2 | B | high | |
| circular_runout | 0.2 | B | high | |
| circular_runout | 0.2 | B | high | |
| total_runout | 0.2 | B | high | |
| total_runout | 0.2 | B | high | |
| total_runout | 0.2 | B | high | |
| profile_of_a_surface | 0.4 | A | B | C | medium | |
| profile_of_a_surface | 0.4 | A | B | C | medium |
All 18 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 254.0 | overall width 254.0mm |
| 2 | 1 | DistanceY | 150.8 | overall height 150.8mm |
| 3 | 1 | Radius | 1.0 | 2x R1.0mm |
| 4 | 2 | Diameter | 3.0 | Ø3.0mm |
| 5 | 2 | Diameter | 5.0 | Ø5.0mm |
| 6 | 2 | Radius | 9.1 | 6x R9.1mm |
| 7 | 2 | Radius | 9.5 | 6x R9.5mm |
| 8 | 4 | Radius | 1.2 | 2x R1.2mm |
| 9 | 5 | Diameter | 6.0 | Ø6.0mm |
| 10 | 5 | Radius | 3.0 | R3.0mm |
| 11 | 6 | Diameter | 2.4 | 3x Ø2.4mm |
| 12 | 6 | Diameter | 3.2 | 3x Ø3.2mm |
| 13 | 6 | Diameter | 4.0 | 4x Ø4.0mm |
| 14 | 6 | Diameter | 9.9 | Ø9.9mm |
| 15 | 6 | Diameter | 12.0 | Ø12.0mm |
| 16 | 6 | Diameter | 12.7 | Ø12.7mm |
| 17 | 6 | Diameter | 13.0 | 4x Ø13.0mm |
| 18 | 6 | Diameter | 14.0 | 4x Ø14.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
