Sheet 2
OrthographicThis sheet includes 105 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 89 geometry edges from the CAD projection pipeline.
Sheet 4. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the central bore and surrounding mounting holes for detailed inspection.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Piston Head
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.25 | standard_view |
| 2 | Assembly - Top View | 0.19 | standard_view |
| 3 | Assembly - Isometric View | 0.19 | standard_view |
| 4 | Section A-A | 0.25 | section_view |
| 5 | Detail C | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.2 | A | B | C | low | bolt/hole pattern × 12 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 18 (position) |
| position | 0.3 | A | B | C | low | bolt/hole pattern × 4 (position) |
| position | 0.3 | A | B | C | low | bolt/hole pattern × 26 (position) |
| position | 0.75 | A | B | C | medium | bolt/hole pattern × 4 (position) |
| position | 0.3 | A | B | C | low | bolt/hole pattern × 15 (position) |
| position | 0.3 | A | B | C | low | bolt/hole pattern × 18 (position) |
| position | 0.2 | A | B | C | low | 4× Ø18 hole location (position) |
| position | 0.5 | A | B | C | medium | 4× Ø11 hole location (position) |
| position | 0.3 | A | B | C | low | 2× Ø34 hole location (position) |
| position | 0.3 | A | B | C | low | 2× Ø35 hole location (position) |
| profile_of_a_surface | 0.8 | A | B | C | medium | 422 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| profile_of_a_surface | 0.8 | A | B | C | medium | largest surface (1410 mm) reached by no other frame — profile locates it to the datum frame instead of leaving it to the general tolerance note |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.3 | high | ||
| perpendicularity | 0.4 | A | high | |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | low |
| position | 0.75 | diameter | A | B | C | medium |
| position | 0.3 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | medium |
| position | 0.3 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | low |
| cylindricity | 0.2 | high | ||
| circularity | 0.2 | high | ||
| straightness | 0.3 | diameter | high | |
| profile_of_a_surface | 0.8 | A | B | C | medium | |
| profile_of_a_surface | 0.8 | A | B | C | medium |
All 9 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 2 | DistanceX | 1445.0 | overall width 1445.0mm |
| 2 | 2 | DistanceY | 2944.0 | height 2944.0mm at x≈-132.52580999999998mm [unverified span] |
| 3 | 2 | DistanceY | 790.0 | hole pitch 790.0mm (2 x Ø32, from model) |
| 4 | 4 | DistanceX | 2960.0 | overall width 2960.0mm |
| 5 | 4 | DistanceY | 1685.1 | overall height 1685.1mm |
| 6 | 4 | Diameter | 34.0 | Ø34.0mm |
| 7 | 4 | DistanceX | 2910.0 | width 2910.0mm at y≈-843.6111149999998mm [unverified span] |
| 8 | 4 | DistanceX | 2860.0 | width 2860.0mm at y≈222.00292499999995mm [unverified span] |
| 9 | 4 | DistanceX | 500.0 | hole pitch 500.0mm (2 x Ø11, from model) |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
