Sheet 1
OrthographicThis sheet includes 78 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 78 geometry edges from the CAD projection pipeline.
This sheet includes 66 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 83 geometry edges from the CAD projection pipeline.
This sheet includes 83 geometry edges from the CAD projection pipeline.
This sheet includes 61 geometry edges from the CAD projection pipeline.
This sheet includes 60 geometry edges from the CAD projection pipeline.
This sheet includes 60 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Sheet 6. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the piston ring grooves and the bore, providing clear detail on these critical sealing features.
Highlights the bolt pattern around the central hub, ensuring precise placement of fasteners.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Radial Engine Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 1.0 | standard_view |
| 2 | Assembly - Top View | 1.0 | standard_view |
| 3 | Assembly - Isometric View | 1.0 | standard_view |
| 4 | Assembly - Front Hidden View | 1.0 | standard_view |
| 5 | Section A-A | 1.0 | section_view |
| 6 | Section B-B | 1.0 | section_view |
| 7 | Detail C | 2.0 | detail_view |
| 8 | Detail D | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.2 | A | B | low | 151 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 8 | Diameter | 22.0 | 7x Ø22.0mm | outside page band (tried 20 position(s)) |
| 9 | Diameter | 53.0 | Ø53.0mm | refs off printable area |
| 6 | — | value drifted: asked 424.6, measured 128.832 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| cylindricity | 0.2 | high | ||
| circularity | 0.2 | high | ||
| circular_runout | 0.2 | B | high | |
| profile_of_a_surface | 0.2 | A | B | low |
All 43 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 531.3 | overall width 531.3mm |
| 2 | 1 | DistanceY | 93.0 | overall height 93.0mm |
| 3 | 1 | DistanceX | 503.8 | width 503.8mm at y≈-47.818439999999995mm [unverified span] |
| 4 | 1 | DistanceX | 348.1 | width 348.1mm at y≈0.0mm [unverified span] |
| 5 | 1 | DistanceX | 275.4 | width 275.4mm at y≈-15.93948mm [unverified span] |
| 6 | 2 | DistanceX | 537.1 | overall width 537.1mm |
| 7 | 2 | DistanceY | 527.7 | overall height 527.7mm |
| 8 | 2 | Diameter | 10.0 | 4x Ø10.0mm |
| 9 | 2 | DistanceY | 424.6 | hole pitch 424.6mm (vertical, Ø18) |
| 10 | 2 | DistanceY | 424.6 | hole pitch 424.6mm (vertical, Ø22) |
| 11 | 2 | Radius | 11.0 | 5x R11.0mm |
| 12 | 2 | Radius | 24.0 | 8x R24.0mm |
| 13 | 2 | Radius | 36.0 | 2x R36.0mm |
| 14 | 2 | Radius | 72.0 | 4x R72.0mm |
| 15 | 4 | DistanceX | 531.3 | overall width 531.3mm |
| 16 | 4 | DistanceY | 93.0 | overall height 93.0mm |
| 17 | 4 | Radius | 72.0 | 2x R72.0mm |
| 18 | 4 | DistanceX | 503.8 | width 503.8mm at y≈-47.818439999999995mm [unverified span] |
| 19 | 4 | DistanceX | 348.1 | width 348.1mm at y≈0.0mm [unverified span] |
| 20 | 4 | DistanceX | 275.4 | width 275.4mm at y≈-15.93948mm [unverified span] |
| 21 | 5 | DistanceY | 93.0 | overall height 93.0mm |
| 22 | 5 | DistanceX | 504.1 | width 504.1mm at y≈-38.692874999999994mm [unverified span] |
| 23 | 5 | DistanceX | 498.9 | width 498.9mm at y≈-46.43145mm [unverified span] |
| 24 | 5 | DistanceX | 402.5 | width 402.5mm at y≈-30.954299999999996mm [unverified span] |
| 25 | 6 | DistanceX | 527.7 | overall width 527.7mm |
| 26 | 6 | DistanceY | 537.1 | overall height 537.1mm |
| 27 | 6 | Diameter | 22.0 | 6x Ø22.0mm |
| 28 | 6 | Diameter | 24.0 | 5x Ø24.0mm |
| 29 | 6 | DistanceX | 424.6 | hole pitch 424.6mm (horizontal, Ø11) |
| 30 | 6 | Radius | 36.0 | 2x R36.0mm |
| 31 | 6 | Radius | 72.0 | 4x R72.0mm |
| 32 | 6 | Radius | 216.8 | 2x R216.8mm |
| 33 | 8 | Diameter | 18.0 | 5x Ø18.0mm |
| 34 | 8 | Diameter | 36.0 | 5x Ø36.0mm |
| 35 | 9 | Diameter | 52.0 | Ø52.0mm |
| 36 | 9 | Diameter | 63.0 | Ø63.0mm |
| 37 | 9 | DistanceX | 52.0 | hole pitch 52.0mm (horizontal, Ø10) |
| 38 | 9 | Radius | 13.0 | 4x R13.0mm |
| 39 | 10 | Diameter | 52.0 | Ø52.0mm |
| 40 | 10 | Diameter | 53.0 | Ø53.0mm |
| 41 | 10 | Diameter | 63.0 | Ø63.0mm |
| 42 | 10 | DistanceY | 52.0 | hole pitch 52.0mm (vertical, Ø10) |
| 43 | 10 | Radius | 13.0 | 4x R13.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
