Sheet 1
OrthographicThis sheet includes 86 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 86 geometry edges from the CAD projection pipeline.
This sheet includes 110 geometry edges from the CAD projection pipeline.
This sheet includes 111 geometry edges from the CAD projection pipeline.
This sheet includes 115 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the small hole pattern and mechanical linkage components for clear representation.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Railings with Steel Sheet
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.25 | standard_view |
| 2 | Assembly - Top View | 0.2 | standard_view |
| 3 | Assembly - Left View | 0.25 | standard_view |
| 4 | Assembly - Isometric View | 0.2 | standard_view |
| 5 | Section A-A | 0.25 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.2 | C | B | A | low | bolt/hole pattern × 52 (position) |
| profile_of_a_surface | 0.6 | C | B | A | medium | 1128 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 6 | Diameter | 16.0 | 3x Ø16.0mm | outside page band (tried 20 position(s)) |
| 7 | Diameter | 16.0 | 3x Ø16.0mm | outside page band (tried 20 position(s)) |
| 8 | Diameter | 16.0 | 3x Ø16.0mm | outside page band (tried 20 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| perpendicularity | 0.3 | C | high | |
| position | 0.2 | diameter | C | B | A | low |
| profile_of_a_surface | 0.6 | C | B | A | medium |
All 37 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 1321.5 | overall width 1321.5mm |
| 2 | 1 | DistanceY | 1478.7 | overall height 1478.7mm |
| 3 | 1 | Angle | 45.0 | 20x angle 45.0 deg |
| 4 | 1 | Angle | 75.0 | 6x angle 75.0 deg |
| 5 | 2 | DistanceX | 1321.5 | overall width 1321.5mm |
| 6 | 2 | DistanceY | 2723.1 | overall height 2723.1mm |
| 7 | 2 | Diameter | 26.0 | Ø26.0mm |
| 8 | 2 | Diameter | 31.0 | Ø31.0mm |
| 9 | 2 | DistanceX | 240.0 | hole pitch 240.0mm (horizontal, Ø7.1) |
| 10 | 2 | Radius | 20.0 | 4x R20.0mm |
| 11 | 2 | Radius | 50.0 | R50.0mm |
| 12 | 2 | Radius | 877.5 | R877.5mm |
| 13 | 2 | Angle | 60.0 | 5x angle 60.0 deg |
| 14 | 2 | Angle | 43.3 | angle 43.3 deg |
| 15 | 3 | DistanceX | 2702.6 | overall width 2702.6mm |
| 16 | 3 | DistanceY | 1478.1 | overall height 1478.1mm |
| 17 | 3 | Diameter | 7.1 | 2x Ø7.1mm |
| 18 | 3 | DistanceY | 632.6 | hole pitch 632.6mm (vertical, Ø11) |
| 19 | 3 | DistanceY | 1200.3 | hole pitch 1200.3mm (vertical, Ø7.1) |
| 20 | 3 | Radius | 370.0 | R370.0mm |
| 21 | 3 | Radius | 372.0 | R372.0mm |
| 22 | 3 | Radius | 378.0 | 4x R378.0mm |
| 23 | 3 | Angle | 73.8 | 26x angle 73.8 deg |
| 24 | 5 | Diameter | 16.0 | 3x Ø16.0mm |
| 25 | 5 | Diameter | 26.0 | Ø26.0mm |
| 26 | 5 | Radius | 370.0 | 2x R370.0mm |
| 27 | 5 | Radius | 372.0 | 2x R372.0mm |
| 28 | 5 | Radius | 378.0 | 2x R378.0mm |
| 29 | 5 | Angle | 60.0 | 6x angle 60.0 deg |
| 30 | 5 | Angle | 73.8 | 26x angle 73.8 deg |
| 31 | 5 | DistanceY | 60.0 | hole pitch 60.0mm (2 x Ø16, from model) |
| 32 | 6 | Diameter | 11.0 | 3x Ø11.0mm |
| 33 | 6 | Diameter | 15.0 | 3x Ø15.0mm |
| 34 | 7 | Diameter | 11.0 | 3x Ø11.0mm |
| 35 | 7 | Diameter | 15.0 | 3x Ø15.0mm |
| 36 | 8 | Diameter | 11.0 | 3x Ø11.0mm |
| 37 | 8 | Diameter | 15.0 | 3x Ø15.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
