Sheet 2
OrthographicThis sheet includes 112 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 112 geometry edges from the CAD projection pipeline.
This sheet includes 114 geometry edges from the CAD projection pipeline.
This sheet includes 81 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 110 geometry edges from the CAD projection pipeline.
This sheet includes 107 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the central circular opening and the two hex bolts to show precise dimensions and alignment.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Rear Control Arm Mounting Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 5.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 5.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 5.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 7 (position) |
| position | 0.1 | A | B | C | low | bolt/hole pattern × 3 (position) |
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 4 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 10 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 9 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 4 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 5 (position) |
| position | 0.15 | A | B | C | low | 4× Ø6 hole location (position) |
| position | 0.15 | A | B | C | low | 4× Ø8 hole location (position) |
| position | 0.2 | A | B | C | low | 3× Ø14 hole location (position) |
| position | 0.3 | A | B | C | low | 3× Ø54 hole location (position) |
| position | 0.5 | A | B | C | medium | 3× Ø9 hole location (position) |
| position | 0.5 | A | B | C | medium | 2× Ø9.05 hole location (position) |
| profile_of_a_surface | 0.2 | A | B | C | low | 434 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 6 | Radius | 6.5 | R6.5mm | Radius ref Edge537 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 2 | — | value drifted: asked 90, measured 63 | ||
| 5 | — | dimension could not compute |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.1 | diameter | A | B | C | low |
| position | 0.25 | diameter | A | B | C | medium |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | medium |
| position | 0.5 | diameter | A | B | C | medium |
| cylindricity | 0.2 | high | ||
| circularity | 0.2 | high | ||
| straightness | 0.1 | diameter | high | |
| circular_runout | 0.2 | C | high | |
| circular_runout | 0.2 | C | high | |
| circular_runout | 0.2 | C | high | |
| total_runout | 0.2 | C | high | |
| total_runout | 0.2 | C | high | |
| profile_of_a_surface | 0.2 | A | B | C | low |
All 43 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 2 | DistanceX | 134.5 | overall width 134.5mm |
| 2 | 2 | DistanceY | 129.0 | overall height 129.0mm |
| 3 | 2 | Diameter | 9.1 | Ø9.1mm |
| 4 | 2 | Radius | 0.5 | R0.5mm |
| 5 | 2 | Radius | 7.0 | 2x R7.0mm |
| 6 | 3 | DistanceY | 90.2 | overall height 90.2mm |
| 7 | 3 | Diameter | 6.0 | Ø6.0mm |
| 8 | 3 | Diameter | 12.0 | Ø12.0mm |
| 9 | 3 | Angle | 78.9 | 2x angle 78.9 deg |
| 10 | 3 | Angle | 85.5 | 2x angle 85.5 deg |
| 11 | 3 | Distance | 36.0 | hole pitch 36.0mm (2 x Ø3.3, from model) |
| 12 | 3 | DistanceY | 44.0 | hole pitch 44.0mm (2 x Ø3.3, from model) |
| 13 | 5 | Diameter | 8.0 | Ø8.0mm |
| 14 | 5 | Diameter | 10.0 | Ø10.0mm |
| 15 | 5 | Radius | 0.5 | 10x R0.5mm |
| 16 | 5 | Radius | 1.0 | 6x R1.0mm |
| 17 | 5 | Radius | 5.0 | 3x R5.0mm |
| 18 | 5 | Radius | 9.0 | 5x R9.0mm |
| 19 | 5 | Angle | 55.0 | angle 55.0 deg |
| 20 | 5 | Angle | 4.8 | 4x angle 4.8 deg |
| 21 | 5 | Distance | 36.0 | hole pitch 36.0mm (2 x Ø3.3, from model) |
| 22 | 5 | DistanceY | 44.0 | hole pitch 44.0mm (2 x Ø3.3, from model) |
| 23 | 6 | Diameter | 10.0 | 2x Ø10.0mm |
| 24 | 6 | Radius | 2.6 | R2.6mm |
| 25 | 6 | Radius | 5.9 | 4x R5.9mm |
| 26 | 6 | Radius | 7.5 | R7.5mm |
| 27 | 6 | Angle | 10.2 | 2x angle 10.2 deg |
| 28 | 7 | Diameter | 4.0 | Ø4.0mm |
| 29 | 7 | Diameter | 6.0 | Ø6.0mm |
| 30 | 7 | Radius | 1.0 | 22x R1.0mm |
| 31 | 7 | Radius | 1.7 | 2x R1.7mm |
| 32 | 7 | Radius | 2.0 | 8x R2.0mm |
| 33 | 7 | Radius | 3.0 | 7x R3.0mm |
| 34 | 7 | Radius | 5.0 | 3x R5.0mm |
| 35 | 7 | Angle | 47.4 | angle 47.4 deg |
| 36 | 7 | Angle | 73.3 | angle 73.3 deg |
| 37 | 7 | DistanceX | 30.0 | hole pitch 30.0mm (2 x Ø4, from model) |
| 38 | 8 | Diameter | 10.8 | Ø10.8mm |
| 39 | 8 | Radius | 3.4 | R3.4mm |
| 40 | 8 | Radius | 3.5 | R3.5mm |
| 41 | 8 | Radius | 4.1 | R4.1mm |
| 42 | 8 | Radius | 7.0 | 7x R7.0mm |
| 43 | 8 | Radius | 11.0 | 3x R11.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
