Sheet 1
OrthographicThis sheet includes 80 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 80 geometry edges from the CAD projection pipeline.
This sheet includes 55 geometry edges from the CAD projection pipeline.
This sheet includes 81 geometry edges from the CAD projection pipeline.
This sheet includes 78 geometry edges from the CAD projection pipeline.
This sheet includes 80 geometry edges from the CAD projection pipeline.
This sheet includes 55 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the details of the top mounting block, including the concentric bores and their alignment.
Highlights the precise placement and size of the four mounting holes on the square plate.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Orange Pi 5 Max Case with Cooling Legs and Power Button Extension
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Section B-B | 2.0 | section_view |
| 7 | Detail C | 2.0 | detail_view |
| 8 | Detail D | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.2 | A | B | C | medium | 883 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 32 (position) |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 8 (position) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| cylindricity | 0.2 | high | ||
| circular_runout | 0.2 | B | high | |
| circular_runout | 0.2 | B | high | |
| total_runout | 0.2 | B | high | |
| profile_of_a_surface | 0.2 | A | B | C | medium | |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | medium |
All 31 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 192.0 | overall width 192.0mm |
| 2 | 1 | DistanceY | 160.7 | overall height 160.7mm |
| 3 | 1 | DistanceY | 108.4 | height 108.4mm at x≈-25.919999999999998mm [unverified span] |
| 4 | 2 | DistanceY | 208.6 | overall height 208.6mm |
| 5 | 2 | Diameter | 16.3 | Ø16.3mm |
| 6 | 2 | Radius | 5.0 | R5.0mm |
| 7 | 2 | Radius | 7.5 | R7.5mm |
| 8 | 2 | Radius | 12.0 | 2x R12.0mm |
| 9 | 2 | DistanceX | 42.0 | hole pitch 42.0mm (2 x Ø3, from model) |
| 10 | 2 | DistanceX | 31.0 | hole pattern width 31.0mm (4 x Ø3, from model) |
| 11 | 3 | DistanceX | 209.1 | overall width 209.1mm |
| 12 | 3 | DistanceY | 160.7 | overall height 160.7mm |
| 13 | 3 | Radius | 2.0 | 2x R2.0mm |
| 14 | 3 | Radius | 10.0 | 4x R10.0mm |
| 15 | 3 | Angle | 81.0 | 2x angle 81.0 deg |
| 16 | 3 | Angle | 74.8 | 2x angle 74.8 deg |
| 17 | 5 | DistanceX | 209.1 | overall width 209.1mm |
| 18 | 5 | DistanceY | 160.7 | overall height 160.7mm |
| 19 | 5 | Radius | 2.0 | 2x R2.0mm |
| 20 | 5 | Radius | 10.0 | 5x R10.0mm |
| 21 | 5 | Angle | 45.0 | 2x angle 45.0 deg |
| 22 | 5 | Angle | 74.8 | 2x angle 74.8 deg |
| 23 | 6 | Radius | 6.5 | R6.5mm |
| 24 | 6 | DistanceY | 17.9 | height 17.9mm at x≈6.0mm [unverified span] |
| 25 | 6 | DistanceY | 42.0 | hole pitch 42.0mm (2 x Ø3, from model) |
| 26 | 6 | DistanceX | 42.0 | hole pattern width 42.0mm (4 x Ø3, from model) |
| 27 | 6 | DistanceX | 31.0 | hole pattern width 31.0mm (4 x Ø3, from model) |
| 28 | 6 | DistanceY | 31.0 | hole pattern height 31.0mm (4 x Ø3, from model) |
| 29 | 7 | Angle | 81.0 | 4x angle 81.0 deg |
| 30 | 8 | Radius | 3.5 | 2x R3.5mm |
| 31 | 8 | Radius | 6.0 | 2x R6.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
