Sheet 1
OrthographicThis sheet includes 14 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 14 geometry edges from the CAD projection pipeline.
This sheet includes 25 geometry edges from the CAD projection pipeline.
This sheet includes 26 geometry edges from the CAD projection pipeline.
This sheet includes 31 geometry edges from the CAD projection pipeline.
This sheet includes 25 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the end flange and mounting holes, which are small and critical for assembly.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Rubber Drone Catapult
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 1.0 | standard_view |
| 2 | Assembly - Top View | 0.1 | standard_view |
| 3 | Assembly - Left View | 0.2 | standard_view |
| 4 | Assembly - Isometric View | 0.1 | standard_view |
| 5 | Section A-A | 1.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 5 | Radius | 9.4 | 20x R9.4mm | outside page band (tried 10 position(s)) |
| 5 | Radius | 18.9 | 68x R18.9mm | outside page band (tried 10 position(s)) |
| 5 | Radius | 23.6 | 7x R23.6mm | outside page band (tried 10 position(s)) |
| 5 | Diameter | 33.0 | 6x Ø33.0mm | outside page band (tried 10 position(s)) |
| 5 | DistanceX | 118.0 | hole pitch 118.0mm (horizontal, Ø33) | outside page band (tried 16 position(s)) |
| 5 | DistanceY | 198.2 | hole pitch 198.2mm (vertical, Ø33) | outside page band (tried 16 position(s)) |
| 5 | DistanceX | 490.7 | hole pitch 490.7mm (horizontal, Ø23.6) | outside page band (tried 16 position(s)) |
| 5 | DistanceX | 4534.5 | overall width 4534.5mm | refs off printable area |
All 22 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 764.4 | overall width 764.4mm |
| 2 | 1 | DistanceY | 407.7 | overall height 407.7mm |
| 3 | 1 | Radius | 4.7 | 14x R4.7mm |
| 4 | 1 | DistanceX | 651.2 | width 651.2mm at y≈-206.39016mm [unverified span] |
| 5 | 1 | DistanceX | 649.5 | width 649.5mm at y≈-80.26284mm [unverified span] |
| 6 | 1 | DistanceX | 559.8 | width 559.8mm at y≈-126.12732mm [unverified span] |
| 7 | 2 | DistanceX | 764.4 | overall width 764.4mm |
| 8 | 2 | Diameter | 56.6 | 2x Ø56.6mm |
| 9 | 2 | DistanceX | 660.6 | hole pitch 660.6mm (horizontal, Ø56.6) |
| 10 | 2 | Radius | 18.9 | 28x R18.9mm |
| 11 | 2 | DistanceX | 726.2 | width 726.2mm at y≈-2084.42481mm [unverified span] |
| 12 | 2 | DistanceY | 3822.0 | height 3822.0mm at x≈-134.47902mm [unverified span] |
| 13 | 3 | DistanceX | 4534.5 | overall width 4534.5mm |
| 14 | 3 | DistanceY | 407.7 | overall height 407.7mm |
| 15 | 3 | Diameter | 33.0 | 2x Ø33.0mm |
| 16 | 3 | DistanceX | 118.0 | hole pitch 118.0mm (horizontal, Ø33) |
| 17 | 3 | Radius | 9.4 | 20x R9.4mm |
| 18 | 3 | Radius | 18.9 | 68x R18.9mm |
| 19 | 3 | Radius | 23.6 | 9x R23.6mm |
| 20 | 5 | DistanceY | 407.7 | overall height 407.7mm |
| 21 | 5 | Diameter | 23.6 | 8x Ø23.6mm |
| 22 | 6 | Radius | 4.7 | 31x R4.7mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
