Sheet 1
OrthographicThis sheet includes 44 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 44 geometry edges from the CAD projection pipeline.
This sheet includes 39 geometry edges from the CAD projection pipeline.
This sheet includes 46 geometry edges from the CAD projection pipeline.
This sheet includes 45 geometry edges from the CAD projection pipeline.
This sheet includes 45 geometry edges from the CAD projection pipeline.
This sheet includes 45 geometry edges from the CAD projection pipeline.
This sheet includes 45 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the bolt hole pattern on the flange for clear dimensioning.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Shell and Tube Heat Exchanger
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.5 | standard_view |
| 2 | Assembly - Top View | 0.5 | standard_view |
| 3 | Assembly - Left View | 1.0 | standard_view |
| 4 | Assembly - Isometric View | 0.44 | standard_view |
| 5 | Section A-A | 1.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.4 | A | B | low | 193 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 3 | Diameter | 320.0 | Ø320.0mm | overlaps prior label (tried 10 position(s)) |
| 5 | DistanceY | 520.2 | overall height 520.2mm | overlaps prior label (tried 17 position(s)) |
| 6 | Diameter | 16.0 | 9x Ø16.0mm | outside page band (tried 20 position(s)) |
| 7 | Diameter | 16.0 | 9x Ø16.0mm | outside page band (tried 20 position(s)) |
| 8 | Diameter | 16.0 | 9x Ø16.0mm | outside page band (tried 20 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| cylindricity | 0.2 | high | ||
| circular_runout | 0.2 | B | high | |
| total_runout | 0.2 | B | high | |
| profile_of_a_surface | 0.4 | A | B | low |
All 28 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 1330.0 | overall width 1330.0mm |
| 2 | 1 | DistanceY | 520.2 | overall height 520.2mm |
| 3 | 1 | Radius | 20.0 | 2x R20.0mm |
| 4 | 1 | DistanceX | 1310.0 | width 1310.0mm at y≈-159.6mm [unverified span] |
| 5 | 1 | DistanceX | 1125.0 | width 1125.0mm at y≈-259.34999999999997mm [unverified span] |
| 6 | 1 | DistanceX | 1040.0 | width 1040.0mm at y≈-219.45mm [unverified span] |
| 7 | 2 | DistanceX | 1330.0 | overall width 1330.0mm |
| 8 | 2 | DistanceY | 440.0 | overall height 440.0mm |
| 9 | 2 | Diameter | 45.0 | 2x Ø45.0mm |
| 10 | 2 | Diameter | 100.0 | 2x Ø100.0mm |
| 11 | 2 | DistanceX | 1025.0 | hole pitch 1025.0mm (horizontal, Ø45) |
| 12 | 2 | Distance | 80.0 | bolt circle Ø80.0mm (6 x Ø10 holes) |
| 13 | 2 | DistanceX | 225.0 | hole pitch 225.0mm (2 x Ø45, from model) |
| 14 | 2 | DistanceY | 69.3 | hole pattern height 69.3mm (6 x Ø10, from model) |
| 15 | 3 | Diameter | 280.0 | Ø280.0mm |
| 16 | 3 | DistanceX | 195.0 | hole pitch 195.0mm (horizontal, Ø16) |
| 17 | 3 | DistanceY | 195.0 | hole pitch 195.0mm (vertical, Ø16) |
| 18 | 3 | DistanceX | 390.0 | hole pattern width 390.0mm (12 x Ø16, from model) |
| 19 | 3 | DistanceY | 390.0 | hole pattern height 390.0mm (12 x Ø16, from model) |
| 20 | 5 | DistanceX | 440.0 | overall width 440.0mm |
| 21 | 5 | Diameter | 12.0 | 82x Ø12.0mm |
| 22 | 5 | Diameter | 16.0 | 94x Ø16.0mm |
| 23 | 5 | Distance | 280.0 | bolt circle Ø280.0mm (6 x Ø9 holes) |
| 24 | 5 | Radius | 150.0 | R150.0mm |
| 25 | 5 | DistanceX | 280.0 | hole pattern width 280.0mm (6 x Ø10, from model) |
| 26 | 5 | DistanceY | 242.5 | hole pattern height 242.5mm (6 x Ø10, from model) |
| 27 | 5 | DistanceX | 390.0 | hole pattern width 390.0mm (12 x Ø16, from model) |
| 28 | 5 | DistanceY | 390.0 | hole pattern height 390.0mm (12 x Ø16, from model) |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
