Sheet 1
OrthographicThis sheet includes 47 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 47 geometry edges from the CAD projection pipeline.
This sheet includes 85 geometry edges from the CAD projection pipeline.
This sheet includes 73 geometry edges from the CAD projection pipeline.
This sheet includes 35 geometry edges from the CAD projection pipeline.
This sheet includes 72 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the double-lobed internal flow path to clearly show its shape and dimensions.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Oil Cooler Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Right View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 1.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.2 | A | B | C | medium | 184 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 5 | Radius | 83.0 | 3x R83.0mm | overlaps prior label (tried 10 position(s)) |
| 5 | Radius | 83.8 | 3x R83.8mm | overlaps prior label (tried 10 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| cylindricity | 0.2 | high | ||
| circularity | 0.2 | high | ||
| straightness | 0.2 | diameter | high | |
| circular_runout | 0.2 | A | high | |
| circular_runout | 0.2 | A | high | |
| profile_of_a_surface | 0.2 | A | B | C | medium |
All 29 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 428.0 | overall width 428.0mm |
| 2 | 1 | DistanceY | 167.5 | overall height 167.5mm |
| 3 | 1 | Radius | 5.0 | 4x R5.0mm |
| 4 | 1 | Radius | 5.8 | 8x R5.8mm |
| 5 | 1 | DistanceX | 326.0 | width 326.0mm at y≈-83.46mm [unverified span] |
| 6 | 1 | DistanceX | 157.0 | hole pitch 157.0mm (2 x Ø56, from model) |
| 7 | 2 | DistanceX | 428.0 | overall width 428.0mm |
| 8 | 2 | DistanceY | 198.0 | overall height 198.0mm |
| 9 | 2 | Radius | 1.0 | 14x R1.0mm |
| 10 | 2 | Radius | 2.0 | R2.0mm |
| 11 | 2 | Radius | 3.0 | 4x R3.0mm |
| 12 | 2 | Radius | 5.0 | 4x R5.0mm |
| 13 | 2 | DistanceX | 366.5 | width 366.5mm at y≈12.84mm [unverified span] |
| 14 | 3 | DistanceX | 198.0 | overall width 198.0mm |
| 15 | 3 | DistanceY | 167.5 | overall height 167.5mm |
| 16 | 3 | Radius | 57.2 | R57.2mm |
| 17 | 3 | Radius | 82.8 | 6x R82.8mm |
| 18 | 3 | DistanceY | 64.2 | hole pitch 64.2mm (2 x Ø30, from model) |
| 19 | 3 | DistanceX | 137.7 | hole pattern width 137.7mm (8 x Ø9, from model) |
| 20 | 5 | DistanceX | 198.0 | overall width 198.0mm |
| 21 | 5 | DistanceY | 167.5 | overall height 167.5mm |
| 22 | 5 | Diameter | 9.0 | 6x Ø9.0mm |
| 23 | 5 | Radius | 69.2 | 2x R69.2mm |
| 24 | 5 | DistanceY | 64.2 | hole pitch 64.2mm (2 x Ø30, from model) |
| 25 | 5 | DistanceX | 137.7 | hole pattern width 137.7mm (8 x Ø9, from model) |
| 26 | 5 | DistanceY | 137.7 | hole pattern height 137.7mm (8 x Ø9, from model) |
| 27 | 6 | Diameter | 6.3 | Ø6.3mm |
| 28 | 6 | Diameter | 26.0 | Ø26.0mm |
| 29 | 6 | Diameter | 28.0 | Ø28.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
