Sheet 1
OrthographicThis sheet includes 106 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 106 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 91 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
Magnifies the control panel to show the details of the display and buttons.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Siemens Sitrans MAG 5000 Transmitter and Base Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.3 | A | B | C | low | bolt/hole pattern × 3 (position) |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 6 (position) |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 12 (position) |
| profile_of_a_surface | 0.2 | A | B | C | medium | 1294 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 1 | Radius | 0.5 | 11x R0.5mm | Radius ref Edge30 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 1 | Radius | 0.7 | 3x R0.7mm | Radius ref Edge226 is BSplineCurve; no nearby Circle/Arc (a substitute further away is another hole) |
| 2 | Distance | 124.9 | hole pitch 124.9mm (2 x Ø3.9, from model) | outside page band (tried 16 position(s)) |
| 2 | DistanceX | 136.6 | hole pitch 136.6mm (2 x Ø2.5, from model) | outside page band (tried 16 position(s)) |
| 2 | DistanceX | 138.0 | hole pitch 138.0mm (2 x Ø8.5, from model) | outside page band (tried 16 position(s)) |
| 3 | DistanceX | 38.3 | hole pitch 38.3mm (horizontal, Ø17.8) | outside page band (tried 16 position(s)) |
| 3 | DistanceX | 58.0 | hole pitch 58.0mm (2 x Ø19, from model) | outside page band (tried 16 position(s)) |
| 1 | — | value drifted: asked 0.8, measured 1.55441 | ||
| 1 | — | value drifted: asked 1.5, measured 3 | ||
| 1 | — | value drifted: asked 2.5, measured 4.94343 | ||
| 1 | — | value drifted: asked 115.3, measured 229.63 | ||
| 1 | — | value drifted: asked 120.6, measured 234.687 | ||
| 3 | — | value drifted: asked 3.3, measured 5.04949 | ||
| 3 | — | value drifted: asked 8.3, measured 12.5 | ||
| 3 | — | value drifted: asked 8.4, measured 12.75 | ||
| 3 | — | value drifted: asked 8.9, measured 13.5046 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.3 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | medium |
| profile_of_a_surface | 0.2 | A | B | C | medium |
All 15 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 2 | Radius | 1.0 | 8x R1.0mm |
| 2 | 2 | Radius | 5.0 | 4x R5.0mm |
| 3 | 2 | Radius | 8.5 | 8x R8.5mm |
| 4 | 6 | Radius | 0.5 | 6x R0.5mm |
| 5 | 6 | Radius | 4.9 | 4x R4.9mm |
| 6 | 6 | Radius | 5.0 | 6x R5.0mm |
| 7 | 7 | Diameter | 88.0 | 2x Ø88.0mm |
| 8 | 7 | Diameter | 88.5 | Ø88.5mm |
| 9 | 7 | Radius | 54.7 | 8x R54.7mm |
| 10 | 7 | DistanceX | 50.0 | hole pattern width 50.0mm (4 x Ø12.3, from model) |
| 11 | 7 | DistanceY | 50.0 | hole pattern height 50.0mm (4 x Ø12.3, from model) |
| 12 | 7 | DistanceX | 63.0 | hole pitch 63.0mm (2 x Ø3.6, from model) |
| 13 | 7 | Distance | 76.9 | hole pitch 76.9mm (2 x Ø6, from model) |
| 14 | 7 | Distance | 33.5 | hole pitch 33.5mm (2 x Ø4.5, from model) |
| 15 | 7 | DistanceY | 40.2 | hole pitch 40.2mm (2 x Ø4, from model) |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
