Sheet 1
OrthographicThis sheet includes 68 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 68 geometry edges from the CAD projection pipeline.
This sheet includes 69 geometry edges from the CAD projection pipeline.
This sheet includes 87 geometry edges from the CAD projection pipeline.
This sheet includes 47 geometry edges from the CAD projection pipeline.
This sheet includes 69 geometry edges from the CAD projection pipeline.
This sheet includes 68 geometry edges from the CAD projection pipeline.
This sheet includes 68 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the pattern of small through-holes and triangular cutouts on the articulated arm.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Sleeping POD Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.98 | standard_view |
| 2 | Assembly - Top View | 1.0 | standard_view |
| 3 | Assembly - Left View | 0.98 | standard_view |
| 4 | Assembly - Isometric View | 0.98 | standard_view |
| 5 | Section A-A | 0.98 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 1.5 | A | B | C | medium | bolt/hole pattern × 6 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 105 (position) |
| profile_of_a_surface | 0.4 | A | B | C | low | 472 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 3 | Angle | 60.0 | 17x angle 60.0 deg | overlaps prior label (tried 9 position(s)) |
| 3 | — | value drifted: asked 243.3, measured 227.012 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 1.5 | diameter | A | B | C | medium |
| position | 0.15 | diameter | A | B | C | low |
| profile_of_a_surface | 0.4 | A | B | C | low |
All 44 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 154.0 | overall width 154.0mm |
| 2 | 1 | DistanceY | 598.7 | overall height 598.7mm |
| 3 | 1 | DistanceX | 59.0 | hole pattern width 59.0mm (8 x Ø4, from model) |
| 4 | 2 | DistanceX | 154.2 | overall width 154.2mm |
| 5 | 2 | DistanceY | 435.5 | overall height 435.5mm |
| 6 | 2 | Radius | 3.0 | 3x R3.0mm |
| 7 | 2 | Angle | 21.80000000000001 | angle 21.8 deg |
| 8 | 2 | DistanceY | 427.5 | height 427.5mm at x≈0.0mm [unverified span] |
| 9 | 2 | DistanceY | 398.0 | height 398.0mm at x≈13.06392mm [unverified span] |
| 10 | 2 | DistanceY | 386.5 | height 386.5mm at x≈45.72372mm [unverified span] |
| 11 | 2 | DistanceX | 18.0 | hole pitch 18.0mm (2 x Ø7.1, from model) |
| 12 | 3 | DistanceY | 596.6 | overall height 596.6mm |
| 13 | 3 | Diameter | 4.0 | 20x Ø4.0mm |
| 14 | 3 | Diameter | 63.0 | Ø63.0mm |
| 15 | 3 | Angle | 87.0 | 2x angle 87.0 deg |
| 16 | 3 | Distance | 400.0 | hole pitch 400.0mm (2 x Ø45, from model) |
| 17 | 3 | Distance | 37.0 | hole pitch 37.0mm (2 x Ø5, from model) |
| 18 | 5 | DistanceX | 83.9 | width 83.9mm at y≈-34.0mm [unverified span] |
| 19 | 5 | DistanceY | 89.0 | height 89.0mm at x≈18.0mm [unverified span] |
| 20 | 5 | DistanceX | 55.9 | hole pattern width 55.9mm (6 x Ø4, from model) |
| 21 | 5 | DistanceY | 62.9 | hole pattern height 62.9mm (6 x Ø4, from model) |
| 22 | 5 | Distance | 37.0 | hole pitch 37.0mm (2 x Ø5, from model) |
| 23 | 5 | DistanceX | 36.0 | hole pattern width 36.0mm (3 x Ø4, from model) |
| 24 | 5 | DistanceY | 33.7 | hole pattern height 33.7mm (3 x Ø4, from model) |
| 25 | 5 | DistanceX | 27.3 | hole pattern width 27.3mm (4 x Ø4, from model) |
| 26 | 6 | Diameter | 8.0 | Ø8.0mm |
| 27 | 6 | DistanceX | 14.4 | hole pitch 14.4mm (horizontal, Ø3) |
| 28 | 6 | Radius | 1.5 | 7x R1.5mm |
| 29 | 6 | Radius | 7.5 | R7.5mm |
| 30 | 6 | Radius | 8.0 | 4x R8.0mm |
| 31 | 6 | Radius | 13.5 | 2x R13.5mm |
| 32 | 6 | Radius | 15.0 | 5x R15.0mm |
| 33 | 7 | Diameter | 30.0 | Ø30.0mm |
| 34 | 7 | Diameter | 71.0 | Ø71.0mm |
| 35 | 7 | DistanceY | 17.2 | hole pitch 17.2mm (vertical, Ø4) |
| 36 | 7 | Radius | 58.0 | 2x R58.0mm |
| 37 | 7 | DistanceX | 76.2 | hole pattern width 76.2mm (6 x Ø4, from model) |
| 38 | 7 | DistanceY | 74.4 | hole pattern height 74.4mm (6 x Ø4, from model) |
| 39 | 8 | Diameter | 77.0 | Ø77.0mm |
| 40 | 8 | Radius | 2.0 | 2x R2.0mm |
| 41 | 8 | Radius | 5.4 | R5.4mm |
| 42 | 8 | Radius | 19.0 | 2x R19.0mm |
| 43 | 8 | DistanceX | 18.0 | hole pitch 18.0mm (2 x Ø7.1, from model) |
| 44 | 8 | DistanceY | 59.0 | hole pattern height 59.0mm (8 x Ø4, from model) |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
