Sheet 1
OrthographicThis sheet includes 53 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 53 geometry edges from the CAD projection pipeline.
This sheet includes 26 geometry edges from the CAD projection pipeline.
This sheet includes 20 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 45 geometry edges from the CAD projection pipeline.
This sheet includes 46 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the small bolt holes and their arrangement, which are critical for accurate mounting.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Slewing Bearing Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.97 | standard_view |
| 2 | Assembly - Top View | 1.0 | standard_view |
| 3 | Assembly - Left View | 0.97 | standard_view |
| 4 | Assembly - Isometric View | 0.97 | standard_view |
| 5 | Section A-A | 0.97 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.2 | A | C | low | bolt/hole pattern × 26 (position) |
| position | 0.5 | A | C | low | bolt/hole pattern × 3 (position) |
| position | 0.5 | A | C | medium | bolt/hole pattern × 20 (position) |
| position | 0.2 | A | C | low | 142× Ø16 hole location (position) |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 1 | DistanceY | 416.0 | hole pattern height 416.0mm (13 x Ø13, from model) | outside page band (tried 16 position(s)) |
| 1 | DistanceX | 581.4 | hole pattern width 581.4mm (11 x Ø13, from model) | overlaps prior label (tried 17 position(s)) |
| 1 | DistanceY | 581.4 | hole pattern height 581.4mm (11 x Ø13, from model) | overlaps prior label (tried 17 position(s)) |
| 2 | Radius | 260.7 | R260.7mm | overlaps prior label (tried 10 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| cylindricity | 0.2 | high | ||
| position | 0.2 | diameter | A | C | low |
| position | 0.5 | diameter | A | C | low |
| position | 0.5 | diameter | A | C | medium |
| position | 0.2 | diameter | A | C | low |
All 32 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | Diameter | 390.0 | Ø390.0mm |
| 2 | 1 | Diameter | 392.0 | Ø392.0mm |
| 3 | 1 | DistanceY | 394.7 | hole pitch 394.7mm (vertical, Ø10.2) |
| 4 | 1 | DistanceX | 407.8 | hole pattern width 407.8mm (13 x Ø13, from model) |
| 5 | 1 | DistanceX | 395.6 | hole pattern width 395.6mm (10 x Ø11, from model) |
| 6 | 1 | DistanceX | 443.7 | hole pattern width 443.7mm (3 x Ø10.2, from model) |
| 7 | 1 | DistanceY | 502.0 | hole pattern height 502.0mm (3 x Ø10.2, from model) |
| 8 | 2 | DistanceX | 610.0 | overall width 610.0mm |
| 9 | 2 | DistanceY | 60.0 | overall height 60.0mm |
| 10 | 2 | DistanceX | 540.0 | width 540.0mm at y≈-18.3mm [unverified span] |
| 11 | 2 | DistanceX | 503.1 | width 503.1mm at y≈-27.450000000000003mm [unverified span] |
| 12 | 2 | DistanceY | 37.0 | height 37.0mm at x≈-274.5mm [unverified span] |
| 13 | 3 | DistanceX | 60.0 | overall width 60.0mm |
| 14 | 3 | DistanceY | 610.0 | overall height 610.0mm |
| 15 | 3 | Radius | 3.0 | 2x R3.0mm |
| 16 | 3 | DistanceX | 37.0 | width 37.0mm at y≈-274.5mm [unverified span] |
| 17 | 3 | DistanceY | 540.0 | height 540.0mm at x≈18.3mm [unverified span] |
| 18 | 3 | DistanceY | 503.1 | height 503.1mm at x≈27.450000000000003mm [unverified span] |
| 19 | 5 | DistanceY | 610.0 | overall height 610.0mm |
| 20 | 5 | Diameter | 16.0 | Ø16.0mm |
| 21 | 5 | Diameter | 19.8 | 2x Ø19.8mm |
| 22 | 5 | Diameter | 23.5 | Ø23.5mm |
| 23 | 5 | DistanceY | 500.2 | hole pitch 500.2mm (vertical, Ø19.8) |
| 24 | 5 | Radius | 2.0 | 16x R2.0mm |
| 25 | 5 | Radius | 2.5 | 3x R2.5mm |
| 26 | 5 | Radius | 3.0 | 4x R3.0mm |
| 27 | 5 | Radius | 9.9 | 6x R9.9mm |
| 28 | 5 | Radius | 10.0 | 8x R10.0mm |
| 29 | 6 | Diameter | 11.0 | 18x Ø11.0mm |
| 30 | 6 | Diameter | 13.0 | 24x Ø13.0mm |
| 31 | 7 | Diameter | 11.0 | 18x Ø11.0mm |
| 32 | 7 | Diameter | 13.0 | 24x Ø13.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
