Sheet 1
OrthographicThis sheet includes 109 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 109 geometry edges from the CAD projection pipeline.
This sheet includes 108 geometry edges from the CAD projection pipeline.
This sheet includes 116 geometry edges from the CAD projection pipeline.
This sheet includes 112 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
This sheet includes 107 geometry edges from the CAD projection pipeline.
This sheet includes 107 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the central through-hole pattern to show precise dimensions and alignment for mounting.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
LifeRaft (Square Box)
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.81 | standard_view |
| 2 | Assembly - Top View | 0.5 | standard_view |
| 3 | Assembly - Isometric View | 0.5 | standard_view |
| 4 | Assembly - Front Hidden View | 0.81 | standard_view |
| 5 | Section A-A | 0.81 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.15 | B | A | C | low | bolt/hole pattern × 4 (position) |
| position | 0.2 | B | A | C | low | bolt/hole pattern × 6 (position) |
| position | 0.15 | B | A | C | low | 12× Ø6 hole location (position) |
| position | 1.0 | B | A | C | medium | 2× Ø26 hole location (position) |
| position | 1.0 | B | A | C | medium | 2× Ø22 hole location (position) |
| position | 0.2 | B | A | C | low | 2× Ø25.4 hole location (position) |
| profile_of_a_surface | 0.6 | B | A | C | medium | 650 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 1 | Angle | 82.0 | 4x angle 82.0 deg | overlaps prior label (tried 9 position(s)) |
| 1 | DistanceX | 1125.0 | hole pitch 1125.0mm (2 x Ø25.4, from model) | outside page band (tried 17 position(s)) |
| 6 | Radius | 1.0 | 2x R1.0mm | outside page band (tried 20 position(s)) |
| 6 | Radius | 4.2 | 2x R4.2mm | Radius ref Edge65 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 7 | Radius | 4.2 | 2x R4.2mm | Radius ref Edge62 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 8 | Radius | 4.2 | 2x R4.2mm | Radius ref Edge62 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 4 | — | value drifted: asked 620, measured 26.64 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| perpendicularity | 0.3 | B | high | |
| position | 0.15 | diameter | B | A | C | low |
| position | 0.2 | diameter | B | A | C | low |
| position | 0.15 | diameter | B | A | C | low |
| position | 1.0 | diameter | B | A | C | medium |
| position | 1.0 | diameter | B | A | C | medium |
| position | 0.2 | diameter | B | A | C | low |
| profile_of_a_surface | 0.6 | B | A | C | medium |
All 36 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceY | 503.5 | overall height 503.5mm |
| 2 | 1 | Diameter | 6.0 | Ø6.0mm |
| 3 | 1 | Radius | 37.3 | 2x R37.3mm |
| 4 | 1 | Radius | 37.7 | 2x R37.7mm |
| 5 | 1 | Radius | 62.7 | 2x R62.7mm |
| 6 | 1 | Angle | 50.400000000000006 | 6x angle 50.4 deg |
| 7 | 1 | DistanceX | 620.0 | hole pitch 620.0mm (2 x Ø25.4, from model) |
| 8 | 2 | DistanceX | 1150.4 | overall width 1150.4mm |
| 9 | 2 | DistanceY | 769.2 | overall height 769.2mm |
| 10 | 2 | Diameter | 6.0 | Ø6.0mm |
| 11 | 2 | Diameter | 25.4 | 2x Ø25.4mm |
| 12 | 2 | DistanceX | 1125.0 | hole pitch 1125.0mm (horizontal, Ø25.4) |
| 13 | 2 | DistanceY | 400.0 | hole pattern height 400.0mm (4 x Ø25.4, from model) |
| 14 | 2 | DistanceX | 620.0 | hole pitch 620.0mm (2 x Ø25.4, from model) |
| 15 | 4 | DistanceY | 503.5 | overall height 503.5mm |
| 16 | 4 | Diameter | 6.0 | 2x Ø6.0mm |
| 17 | 4 | Diameter | 25.4 | 4x Ø25.4mm |
| 18 | 4 | Angle | 82.0 | 4x angle 82.0 deg |
| 19 | 4 | Angle | 50.400000000000006 | 14x angle 50.4 deg |
| 20 | 4 | DistanceX | 1125.0 | hole pitch 1125.0mm (2 x Ø25.4, from model) |
| 21 | 5 | DistanceX | 766.7 | overall width 766.7mm |
| 22 | 5 | DistanceY | 504.7 | overall height 504.7mm |
| 23 | 5 | Diameter | 6.0 | 4x Ø6.0mm |
| 24 | 5 | Diameter | 25.4 | 4x Ø25.4mm |
| 25 | 5 | DistanceX | 186.5 | hole pitch 186.5mm (horizontal, Ø25.4) |
| 26 | 5 | Radius | 25.0 | 10x R25.0mm |
| 27 | 5 | Radius | 27.0 | 6x R27.0mm |
| 28 | 5 | Angle | 82.0 | 4x angle 82.0 deg |
| 29 | 5 | DistanceX | 180.0 | hole pitch 180.0mm (2 x Ø6, from model) |
| 30 | 6 | Radius | 10.2 | R10.2mm |
| 31 | 7 | Radius | 1.0 | 2x R1.0mm |
| 32 | 7 | Radius | 3.0 | 4x R3.0mm |
| 33 | 7 | Radius | 10.2 | R10.2mm |
| 34 | 8 | Radius | 1.0 | 2x R1.0mm |
| 35 | 8 | Radius | 3.0 | 4x R3.0mm |
| 36 | 8 | Radius | 10.2 | R10.2mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
