Sheet 1
OrthographicThis sheet includes 125 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 125 geometry edges from the CAD projection pipeline.
This sheet includes 78 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
This sheet includes 118 geometry edges from the CAD projection pipeline.
This sheet includes 71 geometry edges from the CAD projection pipeline.
Sheet 4. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the six-bolt pattern on the mounting flange to clarify hole size and spacing for accurate installation.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
BlueRobotics T200 Thruster Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 5.0 | standard_view |
| 2 | Assembly - Top View | 5.0 | standard_view |
| 3 | Assembly - Isometric View | 5.0 | standard_view |
| 4 | Section A-A | 5.0 | section_view |
| 5 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.2 | B | C | medium | bolt/hole pattern × 6 (position) |
| position | 0.25 | B | C | medium | 4× Ø4.7 hole location (position) |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 2 | Radius | 38.8 | 14x R38.8mm | overlaps prior label (tried 10 position(s)) |
| 4 | DistanceX | 98.2 | overall width 98.2mm | refs off printable area |
| 4 | — | value drifted: asked 1.3, measured 6.35 | ||
| 4 | — | value drifted: asked 2, measured 10 | ||
| 4 | — | value drifted: asked 5, measured 25.1373 | ||
| 4 | — | value drifted: asked 5.3, measured 26.7246 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| cylindricity | 0.1 | high | ||
| flatness | 0.05 | high | ||
| position | 0.2 | diameter | B | C | medium |
| position | 0.25 | diameter | B | C | medium |
All 29 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceY | 112.7 | overall height 112.7mm |
| 2 | 1 | Radius | 0.5 | 7x R0.5mm |
| 3 | 1 | Radius | 0.8 | 2x R0.8mm |
| 4 | 1 | Radius | 2.7 | R2.7mm |
| 5 | 1 | Radius | 3.2 | R3.2mm |
| 6 | 1 | Angle | 3.2 | 4x angle 3.2 deg |
| 7 | 1 | Angle | 25.8 | 2x angle 25.8 deg |
| 8 | 2 | DistanceX | 96.6 | overall width 96.6mm |
| 9 | 2 | DistanceY | 97.3 | overall height 97.3mm |
| 10 | 2 | Diameter | 2.2 | Ø2.2mm |
| 11 | 2 | Radius | 17.7 | 4x R17.7mm |
| 12 | 2 | Radius | 20.3 | 6x R20.3mm |
| 13 | 2 | Radius | 38.1 | 9x R38.1mm |
| 14 | 2 | Distance | 19.1 | hole pitch 19.1mm (2 x Ø3.2, from model) |
| 15 | 2 | DistanceX | 31.8 | hole pitch 31.8mm (2 x Ø3.1, from model) |
| 16 | 4 | Angle | 50.1 | 2x angle 50.1 deg |
| 17 | 4 | Angle | 85.4 | 2x angle 85.4 deg |
| 18 | 5 | Diameter | 3.1 | 4x Ø3.1mm |
| 19 | 5 | Diameter | 4.7 | 4x Ø4.7mm |
| 20 | 5 | Distance | 19.0 | bolt circle Ø19.0mm (4 x Ø2.4 holes) |
| 21 | 5 | Radius | 4.9 | 5x R4.9mm |
| 22 | 5 | Radius | 5.3 | 4x R5.3mm |
| 23 | 5 | Radius | 5.4 | 10x R5.4mm |
| 24 | 5 | Radius | 5.5 | 7x R5.5mm |
| 25 | 5 | Angle | 60.0 | 24x angle 60.0 deg |
| 26 | 5 | DistanceX | 19.0 | hole pattern width 19.0mm (4 x Ø4.7, from model) |
| 27 | 5 | DistanceY | 19.0 | hole pattern height 19.0mm (4 x Ø4.7, from model) |
| 28 | 6 | Radius | 1.2 | 8x R1.2mm |
| 29 | 6 | Radius | 1.3 | 18x R1.3mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
