Sheet 1
OrthographicThis sheet includes 70 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 70 geometry edges from the CAD projection pipeline.
This sheet includes 104 geometry edges from the CAD projection pipeline.
This sheet includes 94 geometry edges from the CAD projection pipeline.
This sheet includes 94 geometry edges from the CAD projection pipeline.
This sheet includes 101 geometry edges from the CAD projection pipeline.
Magnifies the detailed geometry of the large bore and surrounding edge, ensuring accurate machining of the hole and fillet.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Table Tooling Plate
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 1.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.3 | A | B | C | low | bolt/hole pattern × 6 (position) |
| profile_of_a_surface | 0.4 | A | B | C | medium | 501 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 2 | Radius | 74.8 | R74.8mm | outside page band (tried 10 position(s)) |
| 2 | Radius | 178.0 | R178.0mm | outside page band (tried 10 position(s)) |
| 2 | DistanceX | 265.9 | hole pitch 265.9mm (horizontal, Ø48.5) | outside page band (tried 16 position(s)) |
| 2 | DistanceX | 438.4 | overall width 438.4mm | outside page band (tried 17 position(s)) |
| 3 | DistanceY | 109.2 | hole pitch 109.2mm (2 x Ø11, from model) | outside page band (tried 16 position(s)) |
| 3 | DistanceY | 118.9 | hole pitch 118.9mm (2 x Ø7, from model) | outside page band (tried 16 position(s)) |
| 3 | DistanceY | 120.3 | hole pitch 120.3mm (2 x Ø6, from model) | outside page band (tried 17 position(s)) |
| 8 | Radius | 3.4 | 22x R3.4mm | Radius ref Edge411 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 8 | Diameter | 59.0 | 2x Ø59.0mm | Diameter ref Edge227 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| parallelism | 0.2 | A | high | |
| position | 0.3 | diameter | A | B | C | low |
| profile_of_a_surface | 0.4 | A | B | C | medium |
All 19 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 438.5 | overall width 438.5mm |
| 2 | 1 | DistanceY | 131.0 | overall height 131.0mm |
| 3 | 2 | Radius | 73.8 | R73.8mm |
| 4 | 2 | Radius | 74.6 | R74.6mm |
| 5 | 2 | Angle | 75.0 | 2x angle 75.0 deg |
| 6 | 3 | Diameter | 2.6 | Ø2.6mm |
| 7 | 3 | Radius | 114.7 | 2x R114.7mm |
| 8 | 3 | Radius | 153.5 | 2x R153.5mm |
| 9 | 3 | Radius | 155.0 | 3x R155.0mm |
| 10 | 7 | Radius | 0.5 | R0.5mm |
| 11 | 7 | Radius | 1.3 | R1.3mm |
| 12 | 7 | Radius | 2.1 | 2x R2.1mm |
| 13 | 7 | Radius | 2.5 | 4x R2.5mm |
| 14 | 7 | Radius | 2.8 | 2x R2.8mm |
| 15 | 7 | Radius | 12.3 | 2x R12.3mm |
| 16 | 8 | Diameter | 48.5 | 2x Ø48.5mm |
| 17 | 8 | Diameter | 50.8 | 2x Ø50.8mm |
| 18 | 8 | Radius | 23.2 | 22x R23.2mm |
| 19 | 8 | Radius | 31.0 | 4x R31.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
