Sheet 1
OrthographicThis sheet includes 92 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 92 geometry edges from the CAD projection pipeline.
This sheet includes 85 geometry edges from the CAD projection pipeline.
This sheet includes 68 geometry edges from the CAD projection pipeline.
This sheet includes 84 geometry edges from the CAD projection pipeline.
This sheet includes 84 geometry edges from the CAD projection pipeline.
Sheet 4. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the central hub and surrounding bolt hole pattern for precise dimensioning.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
F1 Car Chassis
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 1.0 | standard_view |
| 3 | Assembly - Isometric View | 1.0 | standard_view |
| 4 | Section A-A | 2.0 | section_view |
| 5 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.2 | A | B | C | low | bolt/hole pattern × 5 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 31 (position) |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 2 | Radius | 158.0 | 8x R158.0mm | overlaps prior label (tried 10 position(s)) |
| 2 | Radius | 160.0 | 21x R160.0mm | overlaps prior label (tried 10 position(s)) |
| 2 | Radius | 165.0 | 2x R165.0mm | overlaps prior label (tried 10 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| position | 0.2 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
All 30 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 342.5 | overall width 342.5mm |
| 2 | 1 | DistanceY | 89.0 | overall height 89.0mm |
| 3 | 1 | Diameter | 4.0 | 2x Ø4.0mm |
| 4 | 1 | Diameter | 16.0 | Ø16.0mm |
| 5 | 1 | DistanceY | 65.0 | hole pitch 65.0mm (vertical, Ø4) |
| 6 | 1 | Radius | 2.0 | 14x R2.0mm |
| 7 | 1 | Radius | 4.0 | R4.0mm |
| 8 | 1 | Radius | 4.5 | 6x R4.5mm |
| 9 | 1 | Radius | 8.0 | 10x R8.0mm |
| 10 | 1 | DistanceY | 64.8 | hole pitch 64.8mm (2 x Ø9, from model) |
| 11 | 2 | Diameter | 5.0 | 26x Ø5.0mm |
| 12 | 2 | Diameter | 12.0 | 4x Ø12.0mm |
| 13 | 2 | DistanceX | 58.8 | hole pitch 58.8mm (horizontal, Ø12) |
| 14 | 2 | DistanceX | 95.1 | hole pattern width 95.1mm (5 x Ø12, from model) |
| 15 | 2 | DistanceY | 90.5 | hole pattern height 90.5mm (5 x Ø12, from model) |
| 16 | 2 | DistanceY | 101.2 | hole pitch 101.2mm (2 x Ø5, from model) |
| 17 | 2 | DistanceY | 131.9 | hole pitch 131.9mm (2 x Ø10, from model) |
| 18 | 4 | DistanceX | 330.0 | overall width 330.0mm |
| 19 | 4 | DistanceX | 149.5 | width 149.5mm at y≈29.700000000000003mm [unverified span] |
| 20 | 4 | DistanceY | 54.0 | height 54.0mm at x≈-69.3mm [unverified span] |
| 21 | 5 | Diameter | 45.0 | 3x Ø45.0mm |
| 22 | 5 | DistanceY | 40.0 | hole pitch 40.0mm (vertical, Ø45) |
| 23 | 5 | Radius | 20.5 | 9x R20.5mm |
| 24 | 5 | Radius | 22.5 | R22.5mm |
| 25 | 5 | Radius | 30.5 | 16x R30.5mm |
| 26 | 6 | Diameter | 45.0 | 3x Ø45.0mm |
| 27 | 6 | DistanceY | 40.0 | hole pitch 40.0mm (vertical, Ø45) |
| 28 | 6 | Radius | 20.5 | 9x R20.5mm |
| 29 | 6 | Radius | 22.5 | R22.5mm |
| 30 | 6 | Radius | 30.5 | 16x R30.5mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
