Sheet 1
OrthographicThis sheet includes 107 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 107 geometry edges from the CAD projection pipeline.
This sheet includes 112 geometry edges from the CAD projection pipeline.
This sheet includes 109 geometry edges from the CAD projection pipeline.
This sheet includes 112 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the gear/pulley system and belt connections, providing clear detail of the mechanical linkage.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Hatz 3L41C Diesel Engine Mounting Block
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.1 | standard_view |
| 2 | Assembly - Top View | 0.1 | standard_view |
| 3 | Assembly - Right View | 0.18 | standard_view |
| 4 | Assembly - Isometric View | 0.08 | standard_view |
| 5 | Section A-A | 0.1 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.8 | A | B | C | medium | 904 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 2 | Angle | 52.0 | 2x angle 52.0 deg | Angle ref Edge304 is Circle; an angle needs two straight edges |
| 5 | Radius | 900.0 | 23x R900.0mm | overlaps prior label (tried 10 position(s)) |
| 7 | Radius | 4.1 | R4.1mm | outside page band (tried 20 position(s)) |
| 7 | Radius | 4.3 | R4.3mm | outside page band (tried 20 position(s)) |
| 7 | Radius | 8.4 | R8.4mm | outside page band (tried 20 position(s)) |
| 2 | — | value drifted: asked 591, measured 734.502 | ||
| 2 | — | value drifted: asked 860, measured 4391.5 | ||
| 2 | — | value drifted: asked 1730, measured 1265 | ||
| 2 | — | value drifted: asked 2060, measured 597.871 | ||
| 5 | — | dimension could not compute | ||
| 5 | — | dimension could not compute |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.4 | high | ||
| perpendicularity | 0.5 | A | high | |
| profile_of_a_surface | 0.8 | A | B | C | medium |
All 35 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 6750.5 | overall width 6750.5mm |
| 2 | 1 | DistanceY | 3144.0 | overall height 3144.0mm |
| 3 | 1 | Diameter | 80.0 | Ø80.0mm |
| 4 | 1 | Diameter | 300.0 | Ø300.0mm |
| 5 | 1 | Radius | 14.3 | R14.3mm |
| 6 | 1 | Radius | 15.9 | 2x R15.9mm |
| 7 | 1 | Radius | 16.0 | 3x R16.0mm |
| 8 | 1 | Radius | 16.9 | R16.9mm |
| 9 | 1 | Radius | 22.4 | R22.4mm |
| 10 | 1 | Angle | 60.0 | 2x angle 60.0 deg |
| 11 | 2 | DistanceX | 6750.5 | overall width 6750.5mm |
| 12 | 2 | DistanceY | 2320.0 | overall height 2320.0mm |
| 13 | 2 | Diameter | 100.0 | 2x Ø100.0mm |
| 14 | 2 | Diameter | 300.0 | 2x Ø300.0mm |
| 15 | 2 | Angle | 59.1 | 2x angle 59.1 deg |
| 16 | 3 | DistanceX | 2320.0 | overall width 2320.0mm |
| 17 | 3 | DistanceY | 3144.0 | overall height 3144.0mm |
| 18 | 3 | Diameter | 1700.0 | Ø1700.0mm |
| 19 | 3 | Diameter | 1800.0 | Ø1800.0mm |
| 20 | 3 | DistanceY | 625.0 | hole pitch 625.0mm (vertical, Ø15) |
| 21 | 3 | Radius | 104.0 | R104.0mm |
| 22 | 3 | Radius | 160.0 | R160.0mm |
| 23 | 3 | Radius | 335.0 | R335.0mm |
| 24 | 3 | Angle | 64.0 | 2x angle 64.0 deg |
| 25 | 3 | Angle | 85.6 | 4x angle 85.6 deg |
| 26 | 5 | DistanceX | 2320.0 | overall width 2320.0mm |
| 27 | 5 | DistanceY | 3144.0 | overall height 3144.0mm |
| 28 | 5 | Diameter | 50.0 | Ø50.0mm |
| 29 | 5 | Diameter | 120.0 | Ø120.0mm |
| 30 | 5 | DistanceY | 160.0 | hole pitch 160.0mm (vertical, Ø15) |
| 31 | 5 | DistanceX | 169.1 | hole pitch 169.1mm (horizontal, Ø15) |
| 32 | 5 | Radius | 217.8 | 2x R217.8mm |
| 33 | 5 | Radius | 790.0 | 4x R790.0mm |
| 34 | 5 | Radius | 850.0 | 8x R850.0mm |
| 35 | 6 | Diameter | 14.0 | 2x Ø14.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
