Sheet 1
OrthographicThis sheet includes 115 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 115 geometry edges from the CAD projection pipeline.
This sheet includes 107 geometry edges from the CAD projection pipeline.
This sheet includes 116 geometry edges from the CAD projection pipeline.
This sheet includes 111 geometry edges from the CAD projection pipeline.
This sheet includes 108 geometry edges from the CAD projection pipeline.
This sheet includes 108 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the detail of the chain attachment point on the frame, highlighting the bolted connection.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
TIG Welding Cart
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 1.0 | standard_view |
| 2 | Assembly - Top View | 0.25 | standard_view |
| 3 | Assembly - Left View | 0.5 | standard_view |
| 4 | Assembly - Isometric View | 0.25 | standard_view |
| 5 | Section A-A | 1.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.5 | A | C | low | bolt/hole pattern × 8 (position) |
| position | 0.5 | A | C | low | bolt/hole pattern × 12 (position) |
| profile_of_a_surface | 0.4 | A | C | medium | 932 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| profile_of_a_surface | 0.4 | A | C | medium | largest surface (157 mm) reached by no other frame — profile locates it to the datum frame instead of leaving it to the general tolerance note |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 2 | — | value drifted: asked 257, measured 24.313 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| position | 0.5 | diameter | A | C | low |
| position | 0.5 | diameter | A | C | low |
| profile_of_a_surface | 0.4 | A | C | medium | |
| profile_of_a_surface | 0.4 | A | C | medium |
All 43 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceY | 483.2 | overall height 483.2mm |
| 2 | 1 | Radius | 6.3 | R6.3mm |
| 3 | 1 | Radius | 9.5 | R9.5mm |
| 4 | 1 | Radius | 12.7 | 2x R12.7mm |
| 5 | 1 | Angle | 45.0 | 12x angle 45.0 deg |
| 6 | 1 | Angle | 71.0 | 2x angle 71.0 deg |
| 7 | 2 | DistanceX | 446.1 | overall width 446.1mm |
| 8 | 2 | Diameter | 8.0 | 3x Ø8.0mm |
| 9 | 2 | Diameter | 13.0 | Ø13.0mm |
| 10 | 2 | Radius | 3.2 | 4x R3.2mm |
| 11 | 2 | Radius | 4.0 | 7x R4.0mm |
| 12 | 2 | Radius | 4.7 | R4.7mm |
| 13 | 2 | Radius | 9.5 | 2x R9.5mm |
| 14 | 2 | DistanceX | 17.6 | hole pattern width 17.6mm (4 x Ø8, from model) |
| 15 | 2 | DistanceX | 14.3 | hole pitch 14.3mm (2 x Ø9.6, from model) |
| 16 | 3 | Diameter | 22.9 | Ø22.9mm |
| 17 | 3 | Diameter | 26.9 | Ø26.9mm |
| 18 | 3 | Radius | 12.7 | 4x R12.7mm |
| 19 | 3 | Radius | 13.3 | R13.3mm |
| 20 | 3 | Angle | 30.0 | 4x angle 30.0 deg |
| 21 | 3 | Angle | 68.0 | angle 68.0 deg |
| 22 | 3 | DistanceY | 14.2 | hole pitch 14.2mm (2 x Ø9.6, from model) |
| 23 | 3 | DistanceX | 17.6 | hole pattern width 17.6mm (4 x Ø8, from model) |
| 24 | 3 | DistanceY | 17.4 | hole pattern height 17.4mm (4 x Ø8, from model) |
| 25 | 5 | Diameter | 20.0 | Ø20.0mm |
| 26 | 5 | Diameter | 26.7 | Ø26.7mm |
| 27 | 5 | Radius | 20.0 | R20.0mm |
| 28 | 5 | Radius | 50.0 | 8x R50.0mm |
| 29 | 5 | Radius | 60.5 | 3x R60.5mm |
| 30 | 5 | Radius | 82.4 | 2x R82.4mm |
| 31 | 5 | Angle | 68.0 | angle 68.0 deg |
| 32 | 5 | Angle | 36.0 | 3x angle 36.0 deg |
| 33 | 5 | DistanceX | 17.6 | hole pattern width 17.6mm (4 x Ø8, from model) |
| 34 | 7 | Diameter | 17.0 | 2x Ø17.0mm |
| 35 | 7 | Diameter | 119.0 | Ø119.0mm |
| 36 | 7 | Diameter | 121.0 | Ø121.0mm |
| 37 | 7 | Radius | 40.8 | 10x R40.8mm |
| 38 | 7 | Radius | 41.6 | 10x R41.6mm |
| 39 | 8 | Diameter | 17.0 | 2x Ø17.0mm |
| 40 | 8 | Diameter | 119.0 | Ø119.0mm |
| 41 | 8 | Diameter | 121.0 | Ø121.0mm |
| 42 | 8 | Radius | 40.8 | 10x R40.8mm |
| 43 | 8 | Radius | 41.6 | 10x R41.6mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
