Sheet 1
OrthographicThis sheet includes 110 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 110 geometry edges from the CAD projection pipeline.
This sheet includes 117 geometry edges from the CAD projection pipeline.
This sheet includes 102 geometry edges from the CAD projection pipeline.
This sheet includes 94 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
This sheet includes 111 geometry edges from the CAD projection pipeline.
This sheet includes 100 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the threaded section of the handle and the connection to the shaft, highlighting the screw mechanism.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
ALKO Trailer Jockey Wheel Clamp
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 1.0 | standard_view |
| 2 | Assembly - Top View | 1.0 | standard_view |
| 3 | Assembly - Right View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 0.9500000000000001 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 10 (position) |
| profile_of_a_surface | 0.2 | A | B | C | medium | 708 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 1 | Radius | 9.2 | R9.2mm | Radius ref Edge301 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 1 | Radius | 10.8 | 2x R10.8mm | Radius ref Edge206 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 1 | Diameter | 12.0 | Ø12.0mm | Diameter ref Edge300 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 2 | Radius | 9.2 | R9.2mm | Radius ref Edge372 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 3 | Radius | 3.2 | 4x R3.2mm | Radius ref Edge141 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 3 | Radius | 9.0 | 2x R9.0mm | Radius ref Edge188 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 3 | Radius | 15.0 | 4x R15.0mm | Radius ref Edge153 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 7 | Radius | 4.5 | 3x R4.5mm | outside page band (tried 20 position(s)) |
| 7 | Radius | 10.2 | 5x R10.2mm | Radius ref Edge261 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 8 | Diameter | 36.0 | Ø36.0mm | Diameter ref Edge140 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 2 | — | value drifted: asked 47, measured 38.0423 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.25 | diameter | A | B | C | medium |
| cylindricity | 0.2 | high | ||
| circular_runout | 0.2 | C | high | |
| circular_runout | 0.2 | C | high | |
| profile_of_a_surface | 0.2 | A | B | C | medium |
All 34 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 616.9 | overall width 616.9mm |
| 2 | 1 | DistanceY | 85.0 | overall height 85.0mm |
| 3 | 1 | Radius | 3.3 | 2x R3.3mm |
| 4 | 1 | Radius | 4.4 | 2x R4.4mm |
| 5 | 1 | Angle | 15.0 | 2x angle 15.0 deg |
| 6 | 1 | DistanceY | 11.0 | hole pitch 11.0mm (2 x Ø4, from model) |
| 7 | 2 | DistanceX | 616.9 | overall width 616.9mm |
| 8 | 2 | Radius | 3.3 | 4x R3.3mm |
| 9 | 2 | Radius | 12.0 | 2x R12.0mm |
| 10 | 2 | Radius | 24.0 | 2x R24.0mm |
| 11 | 2 | DistanceX | 76.1 | hole pattern width 76.1mm (5 x Ø5.5, from model) |
| 12 | 2 | DistanceY | 72.4 | hole pattern height 72.4mm (5 x Ø5.5, from model) |
| 13 | 3 | Radius | 12.0 | 2x R12.0mm |
| 14 | 3 | Radius | 17.0 | 2x R17.0mm |
| 15 | 3 | Angle | 17.7 | 3x angle 17.7 deg |
| 16 | 5 | Diameter | 43.7 | Ø43.7mm |
| 17 | 5 | Diameter | 48.3 | Ø48.3mm |
| 18 | 5 | Radius | 2.5 | R2.5mm |
| 19 | 5 | Radius | 3.2 | 4x R3.2mm |
| 20 | 5 | Radius | 9.0 | 2x R9.0mm |
| 21 | 5 | Radius | 12.0 | 2x R12.0mm |
| 22 | 5 | Radius | 15.0 | 4x R15.0mm |
| 23 | 5 | Radius | 17.0 | 2x R17.0mm |
| 24 | 5 | Angle | 75.0 | 4x angle 75.0 deg |
| 25 | 5 | Angle | 17.69999999999999 | angle 17.7 deg |
| 26 | 6 | Diameter | 4.0 | Ø4.0mm |
| 27 | 6 | Radius | 0.8 | 3x R0.8mm |
| 28 | 6 | Radius | 1.2 | 4x R1.2mm |
| 29 | 7 | Diameter | 18.0 | Ø18.0mm |
| 30 | 7 | Diameter | 20.0 | Ø20.0mm |
| 31 | 7 | Diameter | 131.0 | Ø131.0mm |
| 32 | 8 | Diameter | 37.0 | Ø37.0mm |
| 33 | 8 | Diameter | 42.0 | Ø42.0mm |
| 34 | 8 | Radius | 21.9 | 11x R21.9mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
