Sheet 1
OrthographicThis sheet includes 89 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 89 geometry edges from the CAD projection pipeline.
This sheet includes 74 geometry edges from the CAD projection pipeline.
This sheet includes 104 geometry edges from the CAD projection pipeline.
This sheet includes 107 geometry edges from the CAD projection pipeline.
This sheet includes 74 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the hole pattern on the arm, showing the precise arrangement and size of the mounting holes.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Turbine Engine Motion Simulation Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 5.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.5 | A | B | C | medium | bolt/hole pattern × 8 (position) |
| profile_of_a_surface | 0.4 | A | B | C | low | 256 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 6 | Radius | 1.6 | 12x R1.6mm | Radius ref Edge62 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 6 | Diameter | 2.2 | 4x Ø2.2mm | Diameter ref Edge99 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 6 | Radius | 20.0 | 2x R20.0mm | Radius ref Edge172 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| perpendicularity | 0.2 | A | high | |
| parallelism | 0.2 | A | high | |
| position | 0.5 | diameter | A | B | C | medium |
| profile_of_a_surface | 0.4 | A | B | C | low |
All 29 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 177.5 | overall width 177.5mm |
| 2 | 1 | DistanceY | 206.6 | overall height 206.6mm |
| 3 | 1 | Diameter | 3.2 | 16x Ø3.2mm |
| 4 | 1 | Diameter | 9.0 | 3x Ø9.0mm |
| 5 | 1 | DistanceX | 141.4 | hole pitch 141.4mm (horizontal, Ø9) |
| 6 | 1 | DistanceY | 168.5 | hole pitch 168.5mm (vertical, Ø9) |
| 7 | 1 | Angle | 30.0 | 2x angle 30.0 deg |
| 8 | 1 | DistanceX | 30.0 | hole pattern width 30.0mm (8 x Ø3, from model) |
| 9 | 1 | DistanceY | 73.6 | hole pattern height 73.6mm (8 x Ø3, from model) |
| 10 | 2 | DistanceX | 177.5 | overall width 177.5mm |
| 11 | 2 | DistanceY | 92.0 | overall height 92.0mm |
| 12 | 2 | Radius | 1.0 | 6x R1.0mm |
| 13 | 2 | DistanceY | 81.0 | height 81.0mm at x≈-18.641280000000002mm [unverified span] |
| 14 | 2 | DistanceY | 77.0 | height 77.0mm at x≈-10.65216mm [unverified span] |
| 15 | 3 | DistanceX | 91.7 | overall width 91.7mm |
| 16 | 3 | DistanceY | 206.6 | overall height 206.6mm |
| 17 | 3 | Radius | 2.0 | 9x R2.0mm |
| 18 | 3 | Radius | 4.0 | 2x R4.0mm |
| 19 | 3 | Angle | 63.7 | 2x angle 63.7 deg |
| 20 | 3 | Angle | 45.0 | angle 45.0 deg |
| 21 | 5 | DistanceX | 91.7 | overall width 91.7mm |
| 22 | 5 | DistanceY | 206.6 | overall height 206.6mm |
| 23 | 5 | Radius | 1.0 | 12x R1.0mm |
| 24 | 5 | Radius | 2.0 | 18x R2.0mm |
| 25 | 5 | Radius | 3.0 | 6x R3.0mm |
| 26 | 5 | Radius | 4.0 | R4.0mm |
| 27 | 5 | Angle | 63.7 | angle 63.7 deg |
| 28 | 5 | Angle | 25.30000000000001 | angle 25.3 deg |
| 29 | 6 | Angle | 5.5 | 2x angle 5.5 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
