Sheet 1
OrthographicThis sheet includes 46 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 46 geometry edges from the CAD projection pipeline.
This sheet includes 69 geometry edges from the CAD projection pipeline.
This sheet includes 70 geometry edges from the CAD projection pipeline.
This sheet includes 86 geometry edges from the CAD projection pipeline.
This sheet includes 46 geometry edges from the CAD projection pipeline.
This sheet includes 67 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the ring groove details on the piston head for clear specification of depth and width.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Piston for V6 Engine
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.4 | A | B | C | low | 96 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 7 | Diameter | 25.4 | Ø25.4mm | Diameter ref Edge97 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 7 | Radius | 27.9 | R27.9mm | outside page band (tried 20 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| cylindricity | 0.2 | high | ||
| circular_runout | 0.2 | A | high | |
| profile_of_a_surface | 0.4 | A | B | C | low |
All 29 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 127.0 | overall width 127.0mm |
| 2 | 1 | DistanceY | 260.3 | overall height 260.3mm |
| 3 | 1 | DistanceX | 101.6 | width 101.6mm at y≈58.5675mm [unverified span] |
| 4 | 2 | Diameter | 17.5 | 2x Ø17.5mm |
| 5 | 2 | Diameter | 18.7 | 2x Ø18.7mm |
| 6 | 2 | Diameter | 19.1 | 2x Ø19.1mm |
| 7 | 2 | DistanceY | 101.6 | hole pitch 101.6mm (vertical, Ø8.7) |
| 8 | 2 | Radius | 1.2 | 4x R1.2mm |
| 9 | 2 | Radius | 2.5 | 10x R2.5mm |
| 10 | 3 | DistanceX | 127.0 | overall width 127.0mm |
| 11 | 3 | Diameter | 76.2 | Ø76.2mm |
| 12 | 3 | Radius | 2.5 | 26x R2.5mm |
| 13 | 3 | Radius | 3.8 | 4x R3.8mm |
| 14 | 3 | Radius | 5.0 | R5.0mm |
| 15 | 3 | Radius | 10.0 | 2x R10.0mm |
| 16 | 3 | Radius | 48.3 | R48.3mm |
| 17 | 3 | Radius | 49.5 | 2x R49.5mm |
| 18 | 5 | DistanceX | 127.0 | overall width 127.0mm |
| 19 | 5 | Diameter | 25.4 | Ø25.4mm |
| 20 | 5 | Diameter | 50.8 | Ø50.8mm |
| 21 | 5 | Diameter | 76.2 | Ø76.2mm |
| 22 | 5 | Radius | 7.7 | 4x R7.7mm |
| 23 | 5 | Radius | 38.1 | R38.1mm |
| 24 | 6 | Radius | 2.5 | 2x R2.5mm |
| 25 | 7 | Diameter | 12.7 | Ø12.7mm |
| 26 | 7 | Diameter | 20.4 | Ø20.4mm |
| 27 | 7 | Radius | 7.7 | 2x R7.7mm |
| 28 | 7 | Radius | 12.7 | 4x R12.7mm |
| 29 | 7 | Radius | 28.0 | 4x R28.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
