Sheet 1
OrthographicThis sheet includes 25 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 25 geometry edges from the CAD projection pipeline.
This sheet includes 35 geometry edges from the CAD projection pipeline.
This sheet includes 41 geometry edges from the CAD projection pipeline.
This sheet includes 41 geometry edges from the CAD projection pipeline.
This sheet includes 27 geometry edges from the CAD projection pipeline.
This sheet includes 27 geometry edges from the CAD projection pipeline.
This sheet includes 30 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the mechanical linkage at the base of the ramp for clarity.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Wheelchair Ramp Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.1 | standard_view |
| 2 | Assembly - Top View | 0.1 | standard_view |
| 3 | Assembly - Left View | 0.17 | standard_view |
| 4 | Assembly - Isometric View | 0.05 | standard_view |
| 5 | Section A-A | 0.1 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 5 | Radius | 6.5 | R6.5mm | Radius ref Edge520 is BSplineCurve; no nearby Circle/Arc (a substitute further away is another hole) |
| 5 | Radius | 9.1 | 19x R9.1mm | outside page band (tried 10 position(s)) |
| 5 | Radius | 9.2 | 12x R9.2mm | outside page band (tried 10 position(s)) |
| 5 | Radius | 10.7 | 4x R10.7mm | outside page band (tried 10 position(s)) |
| 5 | Radius | 12.1 | 16x R12.1mm | outside page band (tried 10 position(s)) |
| 2 | — | value drifted: asked 514.4, measured 130.595 | ||
| 2 | — | value drifted: asked 622.5, measured 604.172 | ||
| 5 | — | value drifted: asked 5.8, measured 6.50193 |
All 34 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 7712.8 | overall width 7712.8mm |
| 2 | 1 | DistanceY | 3380.4 | overall height 3380.4mm |
| 3 | 1 | Radius | 4.3 | 32x R4.3mm |
| 4 | 1 | Radius | 12.6 | 2x R12.6mm |
| 5 | 1 | DistanceX | 6995.7 | width 6995.7mm at y≈462.76668mm [unverified span] |
| 6 | 1 | DistanceX | 6811.9 | width 6811.9mm at y≈347.07501mm [unverified span] |
| 7 | 2 | DistanceX | 7712.8 | overall width 7712.8mm |
| 8 | 2 | DistanceY | 2525.8 | overall height 2525.8mm |
| 9 | 2 | Diameter | 18.4 | 4x Ø18.4mm |
| 10 | 2 | DistanceX | 459.3 | hole pitch 459.3mm (horizontal, Ø21.4) |
| 11 | 2 | Radius | 9.1 | R9.1mm |
| 12 | 2 | Radius | 9.3 | R9.3mm |
| 13 | 2 | Radius | 9.6 | R9.6mm |
| 14 | 3 | DistanceX | 2528.1 | overall width 2528.1mm |
| 15 | 3 | DistanceY | 3380.4 | overall height 3380.4mm |
| 16 | 3 | Radius | 12.1 | 22x R12.1mm |
| 17 | 3 | Radius | 12.2 | 31x R12.2mm |
| 18 | 3 | Radius | 12.3 | 11x R12.3mm |
| 19 | 3 | Radius | 13.8 | 3x R13.8mm |
| 20 | 3 | Radius | 15.1 | 2x R15.1mm |
| 21 | 3 | Radius | 15.2 | 4x R15.2mm |
| 22 | 5 | Diameter | 4.3 | 9x Ø4.3mm |
| 23 | 5 | Diameter | 8.1 | 9x Ø8.1mm |
| 24 | 5 | Radius | 4.3 | 12x R4.3mm |
| 25 | 5 | Radius | 11.7 | 3x R11.7mm |
| 26 | 6 | Diameter | 18.4 | Ø18.4mm |
| 27 | 6 | Radius | 9.2 | 25x R9.2mm |
| 28 | 7 | Diameter | 21.4 | 4x Ø21.4mm |
| 29 | 7 | Radius | 5.7 | R5.7mm |
| 30 | 8 | Diameter | 18.4 | Ø18.4mm |
| 31 | 8 | Diameter | 21.4 | Ø21.4mm |
| 32 | 8 | Diameter | 42.9 | Ø42.9mm |
| 33 | 8 | Radius | 9.2 | 26x R9.2mm |
| 34 | 8 | Radius | 10.7 | 4x R10.7mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
