Sheet 1
OrthographicThis sheet includes 106 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 106 geometry edges from the CAD projection pipeline.
This sheet includes 99 geometry edges from the CAD projection pipeline.
This sheet includes 110 geometry edges from the CAD projection pipeline.
Magnifies a small component with a hole pattern to show precise dimensions and alignment.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
XL6019 Bipolar Power Supply Module
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 10.0 | standard_view |
| 2 | Assembly - Top View | 10.0 | standard_view |
| 3 | Assembly - Isometric View | 5.0 | standard_view |
| 4 | Assembly - Front Hidden View | 10.0 | standard_view |
| 5 | Section A-A | 10.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.1 | A | B | C | low | bolt/hole pattern × 10 (position) |
| position | 0.1 | A | B | C | medium | bolt/hole pattern × 8 (position) |
| position | 0.1 | A | B | C | low | bolt/hole pattern × 20 (position) |
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 14 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 8 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 16 (position) |
| position | 0.3 | A | B | C | medium | bolt/hole pattern × 4 (position) |
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 4 (position) |
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 4 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 12 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 6 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 6 (position) |
| position | 0.5 | A | B | C | medium | bolt/hole pattern × 6 (position) |
| position | 0.5 | A | B | C | medium | bolt/hole pattern × 6 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 3 (position) |
| position | 0.3 | A | B | C | medium | bolt/hole pattern × 6 (position) |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 15 (position) |
| position | 0.1 | A | B | C | low | bolt/hole pattern × 5 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 18 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 6 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 6 (position) |
| position | 0.1 | A | B | C | low | bolt/hole pattern × 15 (position) |
| position | 0.1 | A | B | C | medium | bolt/hole pattern × 6 (position) |
| position | 0.2 | A | B | C | medium | hole Ø2.2 location (position) |
| profile_of_a_surface | 0.2 | A | B | C | medium | 1538 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| profile_of_a_surface | 0.2 | A | B | C | medium | largest surface (44 mm) reached by no other frame — profile locates it to the datum frame instead of leaving it to the general tolerance note |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.1 | diameter | A | B | C | low |
| position | 0.1 | diameter | A | B | C | medium |
| position | 0.1 | diameter | A | B | C | low |
| position | 0.25 | diameter | A | B | C | medium |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | medium |
| position | 0.25 | diameter | A | B | C | medium |
| position | 0.25 | diameter | A | B | C | medium |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | medium |
| position | 0.5 | diameter | A | B | C | medium |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.1 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.1 | diameter | A | B | C | low |
| position | 0.1 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | medium |
| cylindricity | 0.2 | high | ||
| circularity | 0.2 | high | ||
| profile_of_a_surface | 0.2 | A | B | C | medium | |
| profile_of_a_surface | 0.2 | A | B | C | medium |
All 24 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 60.0 | overall width 60.0mm |
| 2 | 1 | DistanceY | 21.2 | overall height 21.2mm |
| 3 | 1 | Diameter | 12.0 | Ø12.0mm |
| 4 | 1 | Radius | 0.6 | 2x R0.6mm |
| 5 | 1 | Radius | 1.5 | 4x R1.5mm |
| 6 | 1 | Angle | 25.1 | 4x angle 25.1 deg |
| 7 | 2 | DistanceX | 60.0 | overall width 60.0mm |
| 8 | 2 | DistanceY | 33.0 | overall height 33.0mm |
| 9 | 2 | Diameter | 1.2 | 5x Ø1.2mm |
| 10 | 2 | Diameter | 1.6 | 3x Ø1.6mm |
| 11 | 2 | Diameter | 2.0 | 6x Ø2.0mm |
| 12 | 2 | Diameter | 3.0 | 5x Ø3.0mm |
| 13 | 2 | DistanceY | 5.1 | hole pitch 5.1mm (vertical, Ø3) |
| 14 | 2 | DistanceY | 5.6 | hole pitch 5.6mm (vertical, Ø2) |
| 15 | 4 | DistanceX | 60.0 | overall width 60.0mm |
| 16 | 4 | DistanceY | 21.2 | overall height 21.2mm |
| 17 | 4 | Diameter | 8.5 | Ø8.5mm |
| 18 | 4 | Diameter | 12.0 | Ø12.0mm |
| 19 | 4 | Radius | 1.0 | 14x R1.0mm |
| 20 | 4 | Radius | 1.5 | 16x R1.5mm |
| 21 | 4 | Radius | 2.0 | 18x R2.0mm |
| 22 | 4 | Radius | 7.1 | 3x R7.1mm |
| 23 | 4 | Angle | 25.1 | 8x angle 25.1 deg |
| 24 | 4 | Angle | 81.5 | angle 81.5 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
