Yamaha R15 Motorcycle Chassis Reverse Engineered Model 2D Technical Drawing | PDF, SVG, DXF

Sheet 5section_a · Section5

sheet_num: 5 · edges: 19

Sheet 5. Geometry is derived from the 3D model projection for this drawing set.

19 resolved edges in sheet geometry
See technical_drawing_simple.pdf, sheet_N.pdf, and svg/ for full graphical context
Verify critical dimensions against the source CAD before manufacturing

Sheet 6section_b · Section6

sheet_num: 6 · edges: 55

Sheet 6. Geometry is derived from the 3D model projection for this drawing set.

55 resolved edges in sheet geometry
See technical_drawing_simple.pdf, sheet_N.pdf, and svg/ for full graphical context
Verify critical dimensions against the source CAD before manufacturing

Detail Cdetail_c · base_view: Front

anchor: (629.38, -270.49, 0) · radius: 20

Magnifies the engine mount hole pattern to clearly show the four 15 mm holes arranged on a bolt circle.

Detail-view anchor selected by the AI planning stage
Use with sheet PDF/SVG for local feature inspection
Validate critical dimensions against source CAD before release

Detail Ddetail_d · base_view: Left

anchor: (0, 0, 0) · radius: 15

Highlights the fillet radius at the junction of the head tube and downtube, which is critical for stress distribution.

Detail-view anchor selected by the AI planning stage
Use with sheet PDF/SVG for local feature inspection
Validate critical dimensions against source CAD before release

Drawing details & review

Cover summary and review report for this versioned drawing set.

TECHNICAL DRAWING

69830a3096888fd1a671eb98

Yamaha R15 Chassis

sheets

control frames

dimensions not drawn

Sheet index

Sheet	View	Scale	Content
1	Assembly - Front View	0.5	standard_view
2	Assembly - Top View	0.5	standard_view
3	Assembly - Left View	1.0	standard_view
4	Assembly - Isometric View	0.44	standard_view
5	Section A-A	0.5	section_view
6	Section B-B	0.5	section_view
7	Detail C	2.0	detail_view
8	Detail D	2.0	detail_view

Generated automatically and intended for review before use. A companion review report lists what needs checking.

DRAWING REVIEW REPORT

69830a3096888fd1a671eb98

This drawing is generated automatically and is a first draft. The items below need a human decision.

Summary

dimensions drawn

selected, not drawn

control frames

assumed tolerances

Tolerances to verify

Characteristic	Tol	Datums	Confidence	Reason
position	0.2	B \| A	low	bolt/hole pattern × 4 (position)
position	0.2	B \| A	low	30× Ø18.5 hole location (position)
profile_of_a_surface	0.4	B \| A	low	201 face(s) have no analytic form — profile is the only control that applies to a sculpted surface

Dimensions not drawn

Sheet	Type	Value	Description	Reason
2	Angle	69.2	3x angle 69.2 deg	overlaps prior label (tried 9 position(s))
3	Angle	82.7	2x angle 82.7 deg	overlaps prior label (tried 9 position(s))
5	Angle	64.4	2x angle 64.4 deg	overlaps prior label (tried 9 position(s))
8	Radius	7.6	2x R7.6mm	outside page band (tried 20 position(s))
9	Diameter	6.0	Ø6.0mm	outside page band (tried 20 position(s))

Tolerance schedule

Characteristic	Tol	Zone	Datums	Confidence
flatness	0.05			high
position	0.2	diameter	B \| A	low
position	0.2	diameter	B \| A	low
profile_of_a_surface	0.4		B \| A	low

Dimension schedule

All 37 dimension(s) drawn.

#	Sheet	Type	Value	Description
1	1	DistanceX	1317.4	overall width 1317.4mm
2	1	Radius	8.0	12x R8.0mm
3	1	Radius	353.4	2x R353.4mm
4	1	Angle	85.4	2x angle 85.4 deg
5	1	Angle	31.69999999999999	4x angle 31.7 deg
6	2	DistanceX	1317.4	overall width 1317.4mm
7	2	Diameter	8.0	Ø8.0mm
8	2	Diameter	15.0	Ø15.0mm
9	2	Radius	33.0	3x R33.0mm
10	2	Radius	42.0	3x R42.0mm
11	2	Radius	50.0	5x R50.0mm
12	2	Radius	70.0	4x R70.0mm
13	2	Angle	85.0	4x angle 85.0 deg
14	3	DistanceX	631.3	overall width 631.3mm
15	3	DistanceY	281.5	overall height 281.5mm
16	3	Radius	16.4	2x R16.4mm
17	3	Angle	64.4	2x angle 64.4 deg
18	5	Angle	31.80000000000001	2x angle 31.8 deg
19	5	DistanceX	80.9	width 80.9mm at y≈-20.9043mm [unverified span]
20	5	DistanceY	49.5	height 49.5mm at x≈58.53204mm [unverified span]
21	5	DistanceY	43.0	height 43.0mm at x≈-20.9043mm [unverified span]
22	6	DistanceY	1317.4	overall height 1317.4mm
23	6	Diameter	15.0	Ø15.0mm
24	6	Diameter	22.5	Ø22.5mm
25	6	Radius	42.0	3x R42.0mm
26	6	Radius	50.0	5x R50.0mm
27	6	Radius	70.0	3x R70.0mm
28	6	Radius	78.0	2x R78.0mm
29	6	Angle	69.2	3x angle 69.2 deg
30	6	Angle	85.0	6x angle 85.0 deg
31	7	Radius	4.9	2x R4.9mm
32	8	Radius	9.9	2x R9.9mm
33	9	Radius	2.0	4x R2.0mm
34	9	Radius	5.0	2x R5.0mm
35	10	Diameter	6.0	Ø6.0mm
36	10	Radius	2.0	4x R2.0mm
37	10	Radius	5.0	2x R5.0mm

How these drawings were generated

These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.

These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.