AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
Shows the full profile of the central motor mount and the three vertical posts; critical for understanding the overall height, post spacing, and the recessed coupling area. The Front view is the primary view for overall dimensions and key features.
Reveals the planar layout of the three posts and the central recess; essential for dimensioning the X-axis spacing between posts and the overall width. Shows the top surface geometry and hole locations as circles, which are not visible in the Front view.
Provides the side profile, showing the depth of the central recess and the relative positioning of the left and right posts. This view is necessary to understand the Z-axis depth and the thickness of the mounting flanges.
A vertical YZ-plane section through the center (at centroid Y=0.78, Z=0.05) reveals the internal bore depth, the thickness of the central wall, and the alignment of the three posts relative to the base. This is critical for verifying the internal clearance and wall thickness for the ballscrew coupling.
A vertical YZ-plane section through the center (at centroid Y=0.78, Z=0.05) reveals the internal bore depth, the thickness of the central wall, and the alignment of the three posts relative to the base. This is critical for verifying the internal clearance and wall thickness for the ballscrew coupling.
Magnifies the central 0.461 mm diameter mounting hole (face 63/71) and its adjacent fillet; critical for ensuring proper motor shaft fit and stress relief. The detail clarifies the hole's location relative to the central recess and the 0.231 mm radius fillet.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →
The CAD marketplace for modern teamsEverything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
