Standard conversions from live pricingLive pricingSTEP or STP to 2D drawings2D drawingsSee conversion pricingPricing

2D Technical Drawings AI Generated

3D Model of Armed Military Boat with Minigun and Grenade Launcher 2D Technical Drawing Set

Drawing sheets

Views analysed

Export formats

Section cuts

1st Angle

Projection type

26 Sept 2026

Generated date

STEP

Source CAD format

3D Model of Armed Military Boat with Minigun and Grenade Launcher

Source 3D model

Preview · 2D Drawing Sheets

1 / 7

Verify critical dimensions against the source CAD model before using these drawings for manufacturing or production release. Download the FCStd file where available for the most accurate editable source.

Sheet 1

AI Drawing Analysis

What the AI Decided & Why

The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.

Sheet 1

Orthographic

This sheet includes 49 geometry edges from the CAD projection pipeline.

Sheet 2

Orthographic

This sheet includes 106 geometry edges from the CAD projection pipeline.

Sheet 3

Orthographic

This sheet includes 115 geometry edges from the CAD projection pipeline.

Sheet 5

Orthographic

This sheet includes 106 geometry edges from the CAD projection pipeline.

Sheet 6

Orthographic

This sheet includes 107 geometry edges from the CAD projection pipeline.

Sheet 7

Orthographic

This sheet includes 107 geometry edges from the CAD projection pipeline.

Sheet 8

Orthographic

This sheet includes 107 geometry edges from the CAD projection pipeline.

Sheet 5section_a · Section5

sheet_num: 5 · edges: 106

Sheet 5. Geometry is derived from the 3D model projection for this drawing set.

106 resolved edges in sheet geometry
See technical_drawing_simple.pdf, sheet_N.pdf, and svg/ for full graphical context
Verify critical dimensions against the source CAD before manufacturing

Detail Bdetail_b · base_view: Left

anchor: (1442.59, 1823.72, 3186.91) · radius: 10

Magnifies the engine and piping assembly to show detailed connections and component placement.

Detail-view anchor selected by the AI planning stage
Use with sheet PDF/SVG for local feature inspection
Validate critical dimensions against source CAD before release

Downloads

Download Individual Sheets

Each sheet available in PDF, SVG, and DXF. Click a format badge to download.

Sheet 1

Sheet 2

Sheet 3

Sheet 5

Sheet 6

Sheet 7

Sheet 8

Drawing report

Drawing details & review

Cover summary and review report for this versioned drawing set.

TECHNICAL DRAWING

698056a28fbdc7b47137714f

Arma 3 Assault Boat Assembly

sheets

control frames

dimensions not drawn

Sheet index

Sheet	View	Scale	Content
1	Assembly - Front View	0.2	standard_view
2	Assembly - Top View	0.2	standard_view
3	Assembly - Left View	0.4	standard_view
4	Assembly - Isometric View	0.1	standard_view
5	Section A-A	0.2	section_view
6	Detail B	2.0	detail_view

Generated automatically and intended for review before use. A companion review report lists what needs checking.

DRAWING REVIEW REPORT

698056a28fbdc7b47137714f

This drawing is generated automatically and is a first draft. The items below need a human decision.

Summary

dimensions drawn

selected, not drawn

control frames

assumed tolerances

Tolerances to verify

Characteristic	Tol	Datums	Confidence	Reason
position	0.15	A \| B \| C	low	bolt/hole pattern × 5 (position)
position	0.15	A \| B \| C	low	bolt/hole pattern × 8 (position)
position	0.15	A \| B \| C	low	bolt/hole pattern × 4 (position)
position	0.2	A \| B \| C	low	bolt/hole pattern × 3 (position)
position	0.2	A \| B \| C	low	bolt/hole pattern × 10 (position)
position	0.2	A \| B \| C	low	bolt/hole pattern × 10 (position)
position	0.3	A \| B \| C	low	bolt/hole pattern × 4 (position)
position	0.2	A \| B \| C	low	bolt/hole pattern × 6 (position)
position	0.3	A \| B \| C	low	bolt/hole pattern × 4 (position)
position	0.3	A \| B \| C	low	bolt/hole pattern × 6 (position)
position	0.15	A \| B \| C	low	bolt/hole pattern × 20 (position)
position	0.3	A \| B \| C	low	bolt/hole pattern × 8 (position)
position	0.3	A \| B \| C	low	bolt/hole pattern × 16 (position)
position	0.2	A \| B \| C	low	bolt/hole pattern × 3 (position)
position	0.2	A \| B \| C	low	bolt/hole pattern × 8 (position)
position	1.0	A \| B \| C	medium	bolt/hole pattern × 4 (position)
position	0.3	A \| B \| C	low	bolt/hole pattern × 4 (position)
position	0.3	A \| B \| C	low	bolt/hole pattern × 8 (position)
position	1.5	A \| B \| C	medium	bolt/hole pattern × 3 (position)
position	0.15	A \| B \| C	low	bolt/hole pattern × 4 (position)
position	0.5	A \| B \| C	medium	bolt/hole pattern × 12 (position)
position	0.3	A \| B \| C	medium	bolt/hole pattern × 6 (position)
position	0.2	A \| B \| C	low	bolt/hole pattern × 3 (position)
position	0.2	A \| B \| C	low	bolt/hole pattern × 4 (position)
position	1.0	A \| B \| C	medium	11× Ø20 hole location (position)
position	1.5	A \| B \| C	medium	5× Ø30 hole location (position)
position	0.3	A \| B \| C	low	4× Ø90 hole location (position)
position	0.2	A \| B \| C	low	3× Ø25 hole location (position)
position	0.3	A \| B \| C	low	3× Ø100 hole location (position)
position	0.3	A \| B \| C	low	2× Ø35.87 hole location (position)
profile_of_a_surface	0.8	A \| B \| C	medium	1151 face(s) have no analytic form — profile is the only control that applies to a sculpted surface

Dimensions not drawn

Sheet	Type	Value	Description	Reason
1	DistanceY	460.0	hole pitch 460.0mm (2 x Ø18, from model)	outside page band (tried 16 position(s))
1	DistanceY	989.4	hole pitch 989.4mm (2 x Ø4, from model)	outside page band (tried 16 position(s))
1	DistanceY	1025.8	hole pattern height 1025.8mm (4 x Ø29, from model)	outside page band (tried 17 position(s))
1	DistanceY	1468.0	height 1468.0mm at x≈-1921.944mm [unverified span]	outside page band (tried 17 position(s))
1	DistanceX	4304.0	overall width 4304.0mm	outside page band (tried 16 position(s))
2	Diameter	26.0	Ø26.0mm	Diameter ref Edge330 is BSplineCurve; no nearby Circle/Arc (a substitute further away is another hole)
2	—			value drifted: asked 4304, measured 1733.61
3	—			value drifted: asked 160.3, measured 50.4323

Tolerance schedule

Characteristic	Tol	Zone	Datums	Confidence
flatness	0.05			high
perpendicularity	0.2		A	high
position	0.15	diameter	A \| B \| C	low
position	0.15	diameter	A \| B \| C	low
position	0.15	diameter	A \| B \| C	low
position	0.2	diameter	A \| B \| C	low
position	0.2	diameter	A \| B \| C	low
position	0.2	diameter	A \| B \| C	low
position	0.3	diameter	A \| B \| C	low
position	0.2	diameter	A \| B \| C	low
position	0.3	diameter	A \| B \| C	low
position	0.3	diameter	A \| B \| C	low
position	0.15	diameter	A \| B \| C	low
position	0.3	diameter	A \| B \| C	low
position	0.3	diameter	A \| B \| C	low
position	0.2	diameter	A \| B \| C	low
position	0.2	diameter	A \| B \| C	low
position	1.0	diameter	A \| B \| C	medium
position	0.3	diameter	A \| B \| C	low
position	0.3	diameter	A \| B \| C	low
position	1.5	diameter	A \| B \| C	medium
position	0.15	diameter	A \| B \| C	low
position	0.5	diameter	A \| B \| C	medium
position	0.3	diameter	A \| B \| C	medium
position	0.2	diameter	A \| B \| C	low
position	0.2	diameter	A \| B \| C	low
position	1.0	diameter	A \| B \| C	medium
position	1.5	diameter	A \| B \| C	medium
position	0.3	diameter	A \| B \| C	low
position	0.2	diameter	A \| B \| C	low
position	0.3	diameter	A \| B \| C	low
position	0.3	diameter	A \| B \| C	low
cylindricity	0.2			high
circularity	0.2			high
straightness	0.3	diameter		high
angularity	0.3		A	high
profile_of_a_surface	0.8		A \| B \| C	high
profile_of_a_surface	0.8		A \| B \| C	medium

Dimension schedule

All 42 dimension(s) drawn.

#	Sheet	Type	Value	Description
1	2	Diameter	25.0	Ø25.0mm
2	2	Radius	12.0	R12.0mm
3	2	Radius	19.5	4x R19.5mm
4	2	Radius	20.0	2x R20.0mm
5	2	Radius	21.0	4x R21.0mm
6	2	Radius	24.9	R24.9mm
7	2	Radius	28.0	R28.0mm
8	2	Radius	29.0	4x R29.0mm
9	3	DistanceY	1466.1	overall height 1466.1mm
10	3	Diameter	15.0	4x Ø15.0mm
11	3	Diameter	17.0	2x Ø17.0mm
12	3	DistanceY	160.3	hole pitch 160.3mm (vertical, Ø17)
13	3	Radius	40.0	2x R40.0mm
14	3	Angle	58.9	2x angle 58.9 deg
15	3	Angle	64.9	4x angle 64.9 deg
16	3	DistanceY	520.0	hole pitch 520.0mm (2 x Ø15, from model)
17	5	DistanceY	1466.1	overall height 1466.1mm
18	5	Diameter	15.0	2x Ø15.0mm
19	5	DistanceY	520.0	hole pitch 520.0mm (vertical, Ø15)
20	5	Radius	42.5	2x R42.5mm
21	5	Angle	40.0	2x angle 40.0 deg
22	5	DistanceY	335.0	hole pitch 335.0mm (2 x Ø16, from model)
23	5	DistanceX	44.7	hole pattern width 44.7mm (6 x Ø11, from model)
24	5	DistanceY	160.3	hole pitch 160.3mm (2 x Ø15, from model)
25	6	Diameter	10.0	2x Ø10.0mm
26	6	Diameter	15.6	Ø15.6mm
27	6	Diameter	20.0	Ø20.0mm
28	6	Radius	5.8	5x R5.8mm
29	6	Radius	6.8	5x R6.8mm
30	6	Radius	7.0	4x R7.0mm
31	7	Diameter	10.0	2x Ø10.0mm
32	7	Diameter	15.6	Ø15.6mm
33	7	Diameter	20.0	Ø20.0mm
34	7	Radius	5.8	5x R5.8mm
35	7	Radius	6.8	5x R6.8mm
36	7	Radius	7.0	4x R7.0mm
37	8	Diameter	10.0	2x Ø10.0mm
38	8	Diameter	15.6	Ø15.6mm
39	8	Diameter	20.0	Ø20.0mm
40	8	Radius	5.8	5x R5.8mm
41	8	Radius	6.8	5x R6.8mm
42	8	Radius	7.0	4x R7.0mm

Paid Pipeline · $5.99 per drawing set

Have your own 3D CAD file?

Upload a STEP, STP, IGES or FreeCAD file and generate a 2D drawing set with PDF, SVG and DXF outputs.

✓ Ready in under 4 minutes
✓ 9 sheets · editable FCStd + PDF, SVG, DXF
✓ No subscription · pay per file

$5.99

per drawing set incl. GST

4 min

avg. turnaround

AI Transparency

How these drawings were generated

These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.

These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.

Run Metadata

Views analysed

Sheets generated

Section cuts

Export formats

26 Sept 2026

Generated date

Explore Marathon OS