Sheet 1
OrthographicThis sheet includes 121 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 121 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
Sheet 4. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the internal mounting holes and frame structure for detailed inspection.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Hexacopter Drone Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.25 | standard_view |
| 2 | Assembly - Top View | 0.5 | standard_view |
| 3 | Assembly - Isometric View | 0.25 | standard_view |
| 4 | Section A-A | 0.25 | section_view |
| 5 | Detail C | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.15 | A | B | C | low | bolt/hole pattern × 54 (position) |
| profile_of_a_surface | 0.6 | A | B | C | medium | 862 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| profile_of_a_surface | 0.6 | A | B | C | medium | largest surface (174 mm) reached by no other frame — profile locates it to the datum frame instead of leaving it to the general tolerance note |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 2 | — | value drifted: asked 500, measured 11.7312 | ||
| 4 | — | value drifted: asked 375, measured 362.5 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.3 | high | ||
| position | 0.15 | diameter | A | B | C | low |
| profile_of_a_surface | 0.6 | A | B | C | medium | |
| profile_of_a_surface | 0.6 | A | B | C | medium |
All 26 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 1656.9 | overall width 1656.9mm |
| 2 | 1 | DistanceY | 1618.9 | overall height 1618.9mm |
| 3 | 1 | Diameter | 5.0 | 29x Ø5.0mm |
| 4 | 1 | Diameter | 740.0 | Ø740.0mm |
| 5 | 1 | DistanceX | 500.0 | hole pitch 500.0mm (horizontal, Ø10) |
| 6 | 1 | Distance | 230.9 | bolt circle Ø230.9mm (4 x Ø3 holes) |
| 7 | 1 | Radius | 80.0 | 12x R80.0mm |
| 8 | 1 | Radius | 372.4 | 6x R372.4mm |
| 9 | 1 | DistanceX | 1339.8 | hole pattern width 1339.8mm (6 x Ø5, from model) |
| 10 | 1 | DistanceY | 1546.3 | hole pattern height 1546.3mm (6 x Ø5, from model) |
| 11 | 2 | DistanceX | 1657.4 | overall width 1657.4mm |
| 12 | 2 | DistanceY | 463.8 | overall height 463.8mm |
| 13 | 2 | Radius | 5.0 | 2x R5.0mm |
| 14 | 2 | Radius | 10.5 | 3x R10.5mm |
| 15 | 2 | Radius | 14.0 | R14.0mm |
| 16 | 4 | DistanceX | 463.8 | overall width 463.8mm |
| 17 | 4 | Diameter | 10.0 | 2x Ø10.0mm |
| 18 | 4 | Radius | 0.6 | 16x R0.6mm |
| 19 | 4 | Radius | 1.2 | 8x R1.2mm |
| 20 | 4 | Radius | 2.5 | 4x R2.5mm |
| 21 | 4 | Radius | 5.0 | 3x R5.0mm |
| 22 | 4 | Radius | 7.5 | 4x R7.5mm |
| 23 | 5 | Radius | 15.0 | 12x R15.0mm |
| 24 | 5 | Radius | 18.2 | 12x R18.2mm |
| 25 | 6 | Radius | 15.0 | 12x R15.0mm |
| 26 | 6 | Radius | 18.2 | 12x R18.2mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
