Sheet 1
OrthographicThis sheet includes 78 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 78 geometry edges from the CAD projection pipeline.
This sheet includes 83 geometry edges from the CAD projection pipeline.
This sheet includes 54 geometry edges from the CAD projection pipeline.
This sheet includes 68 geometry edges from the CAD projection pipeline.
This sheet includes 78 geometry edges from the CAD projection pipeline.
This sheet includes 82 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the hexagonal bolt hole and surrounding area for clear identification.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Laboratory Rocker Machine Platform
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 1.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 1.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.15 | A | B | C | low | bolt/hole pattern × 6 (position) |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 12 (position) |
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 16 (position) |
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 4 (position) |
| position | 0.25 | A | B | C | medium | 4× Ø4.2 hole location (position) |
| position | 0.15 | A | B | C | low | 2× Ø4 hole location (position) |
| position | 0.25 | A | B | C | medium | 2× Ø5.5 hole location (position) |
| position | 0.15 | A | B | C | low | 2× Ø5 hole location (position) |
| profile_of_a_surface | 0.4 | A | B | C | low | 107 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| profile_of_a_surface | 0.4 | A | B | C | medium | largest surface (286 mm) reached by no other frame — profile locates it to the datum frame instead of leaving it to the general tolerance note |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.25 | diameter | A | B | C | medium |
| position | 0.25 | diameter | A | B | C | medium |
| position | 0.25 | diameter | A | B | C | medium |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.25 | diameter | A | B | C | medium |
| position | 0.15 | diameter | A | B | C | low |
| cylindricity | 0.1 | high | ||
| profile_of_a_surface | 0.4 | A | B | C | low | |
| profile_of_a_surface | 0.4 | A | B | C | medium |
All 30 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 280.0 | overall width 280.0mm |
| 2 | 1 | Diameter | 5.0 | Ø5.0mm |
| 3 | 1 | Radius | 4.5 | R4.5mm |
| 4 | 1 | Radius | 25.0 | 2x R25.0mm |
| 5 | 1 | DistanceX | 274.6 | width 274.6mm at y≈16.8mm [unverified span] |
| 6 | 1 | DistanceX | 126.9 | width 126.9mm at y≈8.4mm [unverified span] |
| 7 | 2 | DistanceX | 280.0 | overall width 280.0mm |
| 8 | 2 | DistanceY | 300.0 | overall height 300.0mm |
| 9 | 2 | Diameter | 3.0 | 6x Ø3.0mm |
| 10 | 2 | Diameter | 4.2 | 4x Ø4.2mm |
| 11 | 2 | DistanceX | 30.0 | hole pitch 30.0mm (horizontal, Ø4.2) |
| 12 | 2 | DistanceX | 50.0 | hole pitch 50.0mm (horizontal, Ø4.5) |
| 13 | 2 | DistanceY | 75.0 | hole pitch 75.0mm (vertical, Ø3) |
| 14 | 2 | DistanceX | 80.0 | hole pitch 80.0mm (horizontal, Ø3) |
| 15 | 2 | DistanceY | 155.0 | hole pitch 155.0mm (vertical, Ø4.2) |
| 16 | 2 | DistanceY | 187.5 | hole pitch 187.5mm (vertical, Ø4.5) |
| 17 | 3 | DistanceX | 300.0 | overall width 300.0mm |
| 18 | 3 | DistanceY | 55.0 | overall height 55.0mm |
| 19 | 3 | DistanceX | 195.0 | width 195.0mm at y≈9.0mm [unverified span] |
| 20 | 3 | DistanceX | 172.0 | width 172.0mm at y≈-27.0mm [unverified span] |
| 21 | 5 | DistanceX | 300.0 | overall width 300.0mm |
| 22 | 5 | DistanceY | 55.0 | overall height 55.0mm |
| 23 | 5 | Radius | 2.0 | 4x R2.0mm |
| 24 | 5 | DistanceX | 195.0 | width 195.0mm at y≈-9.0mm [unverified span] |
| 25 | 5 | DistanceX | 172.0 | width 172.0mm at y≈-4.5mm [unverified span] |
| 26 | 5 | DistanceX | 166.5 | width 166.5mm at y≈-13.5mm [unverified span] |
| 27 | 6 | Radius | 2.0 | R2.0mm |
| 28 | 7 | Diameter | 3.9 | 2x Ø3.9mm |
| 29 | 7 | Diameter | 4.0 | Ø4.0mm |
| 30 | 7 | DistanceX | 30.0 | hole pitch 30.0mm (horizontal, Ø3.9) |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
