Sheet 1
OrthographicThis sheet includes 104 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 104 geometry edges from the CAD projection pipeline.
This sheet includes 94 geometry edges from the CAD projection pipeline.
This sheet includes 107 geometry edges from the CAD projection pipeline.
This sheet includes 110 geometry edges from the CAD projection pipeline.
This sheet includes 102 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the motorized hoist mechanism to show the gear and pulley system clearly.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Hydraulic Patient Lift System
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.2 | standard_view |
| 2 | Assembly - Top View | 0.19 | standard_view |
| 3 | Assembly - Left View | 0.2 | standard_view |
| 4 | Assembly - Isometric View | 0.19 | standard_view |
| 5 | Section A-A | 0.2 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.5 | A | B | C | medium | bolt/hole pattern × 12 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 10 (position) |
| profile_of_a_surface | 0.6 | A | B | C | medium | 578 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 3 | Radius | 40.0 | R40.0mm | outside page band (tried 10 position(s)) |
| 3 | Radius | 50.0 | 7x R50.0mm | outside page band (tried 10 position(s)) |
| 3 | DistanceY | 2320.0 | hole pattern height 2320.0mm (4 x Ø22, from model) | outside page band (tried 16 position(s)) |
| 6 | Radius | 6.1 | 3x R6.1mm | outside page band (tried 20 position(s)) |
| 6 | Diameter | 10.0 | Ø10.0mm | outside page band (tried 20 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.3 | high | ||
| perpendicularity | 0.3 | A | high | |
| position | 0.5 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | low |
| profile_of_a_surface | 0.6 | A | B | C | medium |
All 33 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceY | 2610.0 | overall height 2610.0mm |
| 2 | 1 | Diameter | 40.0 | Ø40.0mm |
| 3 | 1 | Diameter | 100.5 | Ø100.5mm |
| 4 | 1 | Radius | 10.0 | 6x R10.0mm |
| 5 | 1 | Radius | 15.0 | 4x R15.0mm |
| 6 | 1 | Radius | 16.6 | R16.6mm |
| 7 | 1 | Radius | 16.9 | R16.9mm |
| 8 | 1 | DistanceX | 425.0 | hole pattern width 425.0mm (4 x Ø15, from model) |
| 9 | 1 | DistanceY | 150.0 | hole pattern height 150.0mm (4 x Ø15, from model) |
| 10 | 1 | DistanceX | 505.0 | hole pitch 505.0mm (2 x Ø30, from model) |
| 11 | 2 | DistanceY | 3030.0 | overall height 3030.0mm |
| 12 | 2 | Diameter | 9.7 | 4x Ø9.7mm |
| 13 | 2 | Diameter | 11.0 | 4x Ø11.0mm |
| 14 | 2 | Distance | 650.5 | bolt circle Ø650.5mm (4 x Ø7.7 holes) |
| 15 | 2 | Radius | 10.0 | 2x R10.0mm |
| 16 | 2 | Radius | 60.0 | 2x R60.0mm |
| 17 | 2 | DistanceX | 460.0 | hole pattern width 460.0mm (4 x Ø11, from model) |
| 18 | 2 | DistanceY | 460.0 | hole pattern height 460.0mm (4 x Ø11, from model) |
| 19 | 2 | DistanceX | 60.0 | hole pattern width 60.0mm (4 x Ø11, from model) |
| 20 | 2 | DistanceY | 100.0 | hole pattern height 100.0mm (4 x Ø11, from model) |
| 21 | 3 | Diameter | 30.0 | 3x Ø30.0mm |
| 22 | 3 | Diameter | 33.0 | 2x Ø33.0mm |
| 23 | 3 | Radius | 20.0 | 2x R20.0mm |
| 24 | 3 | Radius | 20.3 | 2x R20.3mm |
| 25 | 3 | Radius | 25.3 | R25.3mm |
| 26 | 3 | Radius | 30.0 | R30.0mm |
| 27 | 3 | Radius | 45.0 | 2x R45.0mm |
| 28 | 5 | Diameter | 20.0 | Ø20.0mm |
| 29 | 5 | Diameter | 30.0 | 2x Ø30.0mm |
| 30 | 5 | DistanceY | 1156.5 | hole pitch 1156.5mm (vertical, Ø30) |
| 31 | 5 | DistanceY | 2320.0 | hole pitch 2320.0mm (vertical, Ø22) |
| 32 | 5 | DistanceX | 2850.0 | hole pitch 2850.0mm (horizontal, Ø22) |
| 33 | 5 | Radius | 50.0 | 6x R50.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
