Assembly - Front View
OrthographicPrimary view showing the vertical column, horizontal beam positioning, and articulated arm mechanism. Communicates the overall height (865.5 mm) and the vertical travel range of the system.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
Primary view showing the vertical column, horizontal beam positioning, and articulated arm mechanism. Communicates the overall height (865.5 mm) and the vertical travel range of the system.
Essential for understanding the horizontal XY motion plane, the base platform footprint, and the positioning of the horizontal beam relative to the vertical column. Shows the width (639.5 mm) and depth (469.2 mm) of the system.
Provides side elevation showing the vertical column structure, base platform height, and the depth of the horizontal beam assembly. Reveals the mechanical drive components and support structure not visible from front.
Vertical section through the YZ plane at the centerline reveals the internal structure of the vertical column (hollow tube construction), the height of the horizontal beam mounting, and the vertical travel mechanism. Shows wall thickness of the column and internal support structure.
Vertical section through the YZ plane at the centerline reveals the internal structure of the vertical column (hollow tube construction), the height of the horizontal beam mounting, and the vertical travel mechanism. Shows wall thickness of the column and internal support structure.
Magnifies the articulated arm joint and gripper mechanism to show the precise geometry of the pick-up interface, including any mounting holes, bearing surfaces, and mechanical linkages that are too small to read at assembly scale.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
AI Transparency
The Marathon 3D→2D pipeline rendered 4 views of the 3D CAD model and passed them through our AI analysis engine.
The AI reasoned about the geometry, selected view candidates, and planned 1 section cut to expose critical internal features. It also selected detail-view anchor points for local manufacturing-critical regions. The final drawing configuration was then generated automatically for sheet outputs in SVG, DXF, and PDF.
0 dimension references were mapped across sheets, with per-sheet labels, views, and extracted edge geometry.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
A lightweight, online tool to convert 3D file formats—anytime, anywhere, without installing any software.
Drag & drop your 3D files
Supported formats: STEP (.step, .stp), IGES (.igs, .iges), STL (.stl), PLY (.ply), OFF (.off), BREP (.brp, .brep)
Open CAD files instantly in your browser.No software needed.Private uploads.Automatically deleted after 24hrs.Upload files up to 300 MB
The CAD marketplace for modern teamsEverything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
