Solar Panel Parking Area Design 2D Technical Drawing | PDF, SVG, DXF

Sheet 5section_a · Section5

sheet_num: 5 · edges: 57

Sheet 5. Geometry is derived from the 3D model projection for this drawing set.

57 resolved edges in sheet geometry
See technical_drawing_simple.pdf, sheet_N.pdf, and svg/ for full graphical context
Verify critical dimensions against the source CAD before manufacturing

Detail Cdetail_c · base_view: Front

anchor: (0, 0, 0) · radius: 15

Magnifies the bolt hole pattern on the central bracket, highlighting the precise location and size of the mounting holes.

Detail-view anchor selected by the AI planning stage
Use with sheet PDF/SVG for local feature inspection
Validate critical dimensions against source CAD before release

Detail Ddetail_d · base_view: Left

anchor: (0, 0, 0) · radius: 10

Focuses on the weld joint where diagonal braces connect to the vertical post, ensuring proper structural continuity.

Detail-view anchor selected by the AI planning stage
Use with sheet PDF/SVG for local feature inspection
Validate critical dimensions against source CAD before release

Drawing details & review

Cover summary and review report for this versioned drawing set.

TECHNICAL DRAWING

6980ca90a96c6aa4270c13ec

Solar Panel Support Structure

sheets

control frames

dimensions not drawn

Sheet index

Sheet	View	Scale	Content
1	Assembly - Front View	0.05	standard_view
2	Assembly - Top View	0.1	standard_view
3	Assembly - Left View	0.05	standard_view
4	Assembly - Isometric View	0.05	standard_view
5	Section A-A	0.05	section_view
6	Section B-B	0.1	section_view
7	Detail C	2.0	detail_view
8	Detail D	2.0	detail_view

Generated automatically and intended for review before use. A companion review report lists what needs checking.

DRAWING REVIEW REPORT

6980ca90a96c6aa4270c13ec

This drawing is generated automatically and is a first draft. The items below need a human decision.

Summary

dimensions drawn

selected, not drawn

control frames

assumed tolerances

Tolerances to verify

Characteristic	Tol	Datums	Confidence	Reason
position	0.1	A \| B \| C	low	bolt/hole pattern × 12 (position)
position	1.0	A \| B \| C	medium	bolt/hole pattern × 48 (position)
position	0.3	A \| B \| C	low	bolt/hole pattern × 4 (position)
position	0.2	A \| B \| C	low	bolt/hole pattern × 42 (position)
profile_of_a_surface	0.8	A \| B \| C	low	488 face(s) have no analytic form — profile is the only control that applies to a sculpted surface

Dimensions not drawn

Sheet	Type	Value	Description	Reason
5	—			value drifted: asked 3128, measured 2972.49

Tolerance schedule

Characteristic	Tol	Zone	Datums	Confidence
flatness	0.4			high
perpendicularity	0.3		A	high
position	0.1	diameter	A \| B \| C	low
position	1.0	diameter	A \| B \| C	medium
position	0.3	diameter	A \| B \| C	low
position	0.2	diameter	A \| B \| C	low
profile_of_a_surface	0.8		A \| B \| C	low

Dimension schedule

All 22 dimension(s) drawn.

#	Sheet	Type	Value	Description
1	1	DistanceX	5926.0	overall width 5926.0mm
2	1	DistanceY	11241.8	overall height 11241.8mm
3	1	Diameter	200.0	2x Ø200.0mm
4	1	DistanceX	2884.0	hole pitch 2884.0mm (horizontal, Ø200)
5	1	DistanceX	5758.0	width 5758.0mm at y≈-337.25481mm [unverified span]
6	1	DistanceY	10993.6	height 10993.6mm at x≈-3035.29329mm [unverified span]
7	2	DistanceX	5926.0	overall width 5926.0mm
8	2	DistanceY	5867.4	overall height 5867.4mm
9	2	DistanceX	5770.0	width 5770.0mm at y≈-977.79mm [unverified span]
10	2	DistanceX	5768.0	width 5768.0mm at y≈-1244.46mm [unverified span]
11	2	DistanceX	5752.0	width 5752.0mm at y≈-1155.57mm [unverified span]
12	3	DistanceX	5904.8	overall width 5904.8mm
13	3	DistanceY	11281.0	overall height 11281.0mm
14	3	Angle	35.4	2x angle 35.4 deg
15	3	Angle	45.0	2x angle 45.0 deg
16	5	DistanceX	5904.8	overall width 5904.8mm
17	5	DistanceY	11281.0	overall height 11281.0mm
18	5	Diameter	19.0	4x Ø19.0mm
19	5	DistanceY	336.0	hole pitch 336.0mm (vertical, Ø19)
20	5	DistanceX	4250.0	width 4250.0mm at y≈338.42903999999993mm [unverified span]
21	5	Distance	3928.0	hole pitch 3928.0mm (2 x Ø19, from model)
22	8	Diameter	19.0	4x Ø19.0mm

How these drawings were generated

These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.

These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.