Assembly - Top View
OrthographicShows the plan view of the flanged end connections, bolt pattern layout (12-bolt at 361.6 mm diameter), and the horizontal positioning of the drive-end assembly relative to the main tube.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
Shows the plan view of the flanged end connections, bolt pattern layout (12-bolt at 361.6 mm diameter), and the horizontal positioning of the drive-end assembly relative to the main tube.
Reveals the internal bore diameter (406.4 mm), wall thickness (10.0 mm), and the concentricity of the inner tube relative to the outer housing at the mid-length section.
Reveals the internal bore diameter (406.4 mm), wall thickness (10.0 mm), and the concentricity of the inner tube relative to the outer housing at the mid-length section.
Magnifies the flange connection detail showing the 12-bolt pattern, bolt hole diameter (10.0 mm), and the 100 mm outer flange diameter for assembly verification.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
